Makrolon® FR6019 CTI
Polycarbonate; flame retardant; MVR (300 °C/1.2 kg) 13 cm³/10 min; medium viscosity; UL 94V-0/1.5 mm; CTI = 600 V; for available colors, please contact us
- Brand
- Makrolon
- Available in
- Europe Middle-East and Africa, Asia Pacific, Latin America, North America
Typical values
| Property | Value | Unit | Test method | Condition |
|---|---|---|---|---|
| All attributes | ||||
| Cross check optional criteria | Pass | PCS Meth 029 | ||
| Visual color assessment | Pass | PCS Meth 014 | ||
| Visual pellet evaluation | Pass | PCS Meth 005 | ||
| Thermal properties | ||||
| Temperature of Deflection under Load (HDT) | 125 | °C | ISO 75-1,-2 | 0.45 MPa |
| Temperature of Deflection under Load (HDT) | 112 | °C | ISO 75-1,-2 | 1.80 MPa |
| Vicat Softening Temperature | 130 | °C | ISO 306 | 50 N; 50 °C/h |
| Coefficient of Linear Thermal Expansion (CLTE), parallel | 0.7 | 10⁻⁴/K | ISO 11359-1,-2 | 23 to 55 °C |
| Coefficient of Linear Thermal Expansion (CLTE), normal | 0.71 | 10⁻⁴/K | ISO 11359-1,-2 | 23 to 55 °C |
| Burning Behavior | V-0 | UL 94 | 1.5 mm | |
| Resistance to Heat (Ball Pressure Test, BPT) | 120 | °C | IEC 60695-10-2 | |
| Glow Wire Test (GWFI) | 960 | °C | IEC 60695-2-12 | 3.0 mm |
| Glow Wire Test (GWFI) | 960 | °C | IEC 60695-2-12 | 1.5 mm |
| Glow Wire Test (GWIT) | 825 | °C | IEC 60695-2-13 | 3.0 mm |
| Glow Wire Test (GWIT) | 825 | °C | IEC 60695-2-13 | 1.5 mm |
| Rheological properties | ||||
| Melt Volume-flow Rate (MVR) | 13 | cm³/10 min | ISO 1133-1 | 300 °C/ 1.2 kg |
| Melt Viscosity | 200 | Pa·s | b.o. ISO 11443-A | 1000 s^-1^/ 300 °C |
| Molding Shrinkage, parallel | 0.5 – 0.6 | % | ISO 294-4 | 60x60x2 mm/ 500 bar |
| Molding Shrinkage, normal | 0.5 – 0.6 | % | ISO 294-4 | 60x60x2 mm/ 500 bar |
| Mechanical properties (23 °C; 50 % r. h.) | ||||
| Tensile Modulus | 2470 | MPa | ISO 527-1,-2 | 1 mm/min |
| Yield Stress | 66 | MPa | ISO 527-1,-2 | 5 mm/min |
| Yield Strain | 6 | % | ISO 527-1,-2 | 5 mm/min |
| Stress at Break | 66 | MPa | ISO 527-1,-2 | 5 mm/min |
| Strain at Break | 119 | % | ISO 527-1,-2 | 5 mm/min |
| Nominal Strain at Break | ≥ 50 | % | ISO 527-1,-2 | 5 mm/min |
| Flexural Modulus | 2450 | MPa | ISO 178 | 2 mm/min |
| Flexural Strength | 99 | MPa | ISO 178 | 2 mm/min |
| Flexural Stress at 3.5 % Flexural Strain | 76 | MPa | ISO 178 | 2 mm/min |
| Flexural Strain at Flexural Strength | 7 | % | ISO 178 | 2 mm/min |
| Izod Notched Impact Strength | 9 | kJ/m² | ISO 21305/based on ISO 180/A | 23 °C |
| Charpy Notched Impact Strength | 11 | kJ/m² | ISO 21305/based on ISO 179/1eA | 23 °C |
| Puncture Impact Behavior - Maximum Force | 5200 | N | ISO 6603-2 | 23 °C |
| Puncture Impact Behavior - Puncture Energy | 58 | J | ISO 6603-2 | 23 °C |
| Ball Indentation Hardness | 128 | N/mm² | ISO 2039-1 | |
| Other properties (23 °C) | ||||
| Density | 1200 | kg/m³ | ISO 1183-1 | |
| Electrical properties (23 °C; 50 % r. h.) | ||||
| Volume Resistivity | 4.00E+17 | Ω·m | IEC 62631-3-1 | |
| Surface Resistivity | 5.00E+16 | Ω | IEC 62631-3-2 | |
| Electric Strength | 31 | kV/mm | b.o. IEC 60243-1 | |
| Comparative Tracking Index (CTI) | 600 | IEC 60112 | Solution A | |
| Recommended processing and drying conditions | ||||
| Dry Air Drying Temperature | 120 | °C | ||
| Dry Air Drying Time | 4 | h | ||
| Melt Temperatures | 280 – 310 | °C | ||
| Standard Melt Temperature | 90 | °C | ||
Documents
- Technical Data Sheet
- Safety Data Sheet