Desmopan® 9385A GMP
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; complies with VDE 0282-10; This product is manufactured under Good Manufacturing Practice (GMP defined in Regulation (EC) No. 2023/2006) and is therefore limited suitability for use with food contact. Please refer our separate certificate at http://www.tpu.covestro.com/en/Library/Certificates/Food-Contact.aspx.; Application; Cable sheathings; Hoses, non-reinforced
- Brand
- Desmopan
- Available in
- Europe Middle-East and Africa
Typical values
| Property | Value | Unit | Test method | Condition |
|---|---|---|---|---|
| All attributes | ||||
| Extrusion Gel Index, Number | 0 – 80 | IM 773-B | >600 µ/m² | |
| Rheological properties | ||||
| Melt volume-flow rate (MVR) | 25 – 45 | cm³/10 min | DIN EN ISO 1133 | |
| Mechanical properties (23 °C; 50 % r. h.) | ||||
| Tensile strength | 6 – 7.5 | MPa | ISO 37 , DIN 53504 | 100% Elongation; 200 mm/min |
| Tensile strength | 9.5 – 18 | MPa | ISO 37 , DIN 53504 | 300% Elongation; 200 mm/min |
| Tensile strength | 37 – 55 | MPa | ISO 37 , DIN 53504 | at break; 200 mm/min |
| Elongation | 500 – 700 | % | ISO 37 , DIN 53504 | Elongation at Break |
Documents
- Technical Data Sheet
- Safety Data Sheet