Desmopan® 453
injection molding grade; grease and oil-resistant; low compression set; good wear resistance; Application; Injection molded engineering parts; Automotive engineering; Coupling elements
- Brand
- Desmopan
- Available in
- Latin America, North America
Typical values
| Property | Value | Unit | Test method | Condition |
|---|---|---|---|---|
| All attributes | ||||
| Yellowness Index | -99.99 – 35 | ASTM E313 (D65/10°) | ||
| Mechanical properties (23 °C; 50 % r. h.) | ||||
| Hardness Shore A | 97 | DIN ISO 48-4 | 1s | |
| Hardness Shore D | 51 | DIN ISO 48-4 | 1s | |
| Tensile strength | 37.9 | MPa | ISO 527-2/5A/200 | at break; 200 mm/min |
| Tensile strength | 8.2 | MPa | ISO 527-2/5A/200 | 10% Elongation; 200 mm/min |
| Tensile strength | 15.1 | MPa | ISO 527-2/5A/200 | 50% Elongation; 200 mm/min |
| Tensile strength | 18.3 | MPa | ISO 527-2/5A/200 | 100% Elongation; 200 mm/min |
| Tensile strength | 30.6 | MPa | ISO 527-2/5A/200 | 300% Elongation; 200 mm/min |
| Elongation | 472 | % | ISO 37 , DIN 53504 | Elongation at Break, 200mm/min |
| Compression set | 15 | % | DIN ISO 815 - 1 | 72h/23°C |
| Compression set | 27 | % | DIN ISO 815-1, Method A | 24h/70° |
| Abrasion Resistance (volume) | 32 | mm³ | ISO 4649, Method A | |
| Rebound resilience | 30 | % | ISO 4662 | |
| Tear | 180 | N/mm | ISO 34-1 | 500mm/min |
| Tensile storage modulus | 1780 | MPa | ISO 6721-1,-4 | -20 °C |
| Tensile storage modulus | 240 | MPa | ISO 6721-1,-4 | 20 °C |
| Tensile storage modulus | 110 | MPa | ISO 6721-1,-4 | 60 °C |
| Other properties (23 °C) | ||||
| Density | 1.23 | g/cm³ | ISO 1183-1 | |
Documents
- Technical Data Sheet
- Safety Data Sheet