Desmopan® 3385A
Extrusion- and injection molding grade; good wear resistance; short cycle times; high melt stability; Application; hard - soft systems; Hoses, non-reinforced; Profiles; Injection molded engineering parts
- Brand
- Desmopan
- Available in
- Latin America, North America
Typical values
| Property | Value | Unit | Test method | Condition |
|---|---|---|---|---|
| Mechanical properties (23 °C; 50 % r. h.) | ||||
| Hardness Shore A | 85 | DIN ISO 48-4 | 1s | |
| Hardness Shore D | 33 | DIN ISO 48-4 | 1s | |
| Tensile strength | 52 | MPa | ISO 527-2/5A/200 | at break; 200 mm/min |
| Tensile strength | 2 | MPa | ISO 527-2/5A/200 | 10% Elongation; 200 mm/min |
| Tensile strength | 4.7 | MPa | ISO 527-2/5A/200 | 50% Elongation; 200 mm/min |
| Tensile strength | 5.8 | MPa | ISO 527-2/5A/200 | 100% Elongation; 200 mm/min |
| Tensile strength | 16.6 | MPa | ISO 527-2/5A/200 | 300% Elongation; 200 mm/min |
| Elongation | 531 | % | ISO 527-2/5A/200 | Elongation at Break, 200mm/min |
| Compression set | 20 | % | DIN ISO 815 - 1 | 72h/23°C |
| Compression set | 42 | % | DIN ISO 815-1, Method A | 24h/70° |
| Abrasion Resistance (volume) | 25 | mm³ | ISO 4649, Method A | |
| Rebound resilience | 50 | % | ISO 4662 | |
| Tear | 70 | N/mm | ISO 34-1 | 500mm/min |
| Tensile storage modulus | 84 | MPa | ISO 6721-1,-4 | -20 °C |
| Tensile storage modulus | 28 | MPa | ISO 6721-1,-4 | 20 °C |
| Tensile storage modulus | 21 | MPa | ISO 6721-1,-4 | 60 °C |
| Other properties (23 °C) | ||||
| Density | 1.2 | g/cm³ | ISO 1183-1 | |
Documents
- Technical Data Sheet
- Safety Data Sheet