The plant, which shall create 35 new jobs, will be built at Chemical Park Delfzijl at the northern Coast of the Netherlands. It will use BioBTX's proprietary ICCP technology, which converts the type of mixed plastic waste that would otherwise be incinerated or put to landfill via catalytic pyrolysis into aromatic oil consisting of benzene, toluene and xylenes (B-T-X). These are the same building blocks the chemical industry uses today in coatings, pharmaceuticals and performance materials. They can also be used for the isocyanate production (MDI/TDI) of Covestro, out of which soft foam for e.g. mattresses or rigid foam for insulating refrigerators are made.

"We've followed BioBTX's progress for years and are very happy to now see the point where the technology proves itself at industrial scale," says Dr. Thorsten Dreier, Chief Technology Officer at Covestro. "This marks a very important step. Moreover, it processes mixed plastic waste instead of a single sorted stream, which is exactly the kind of recycling we need more of at scale to make a circular economy become reality."

In total, the plant is expected to recycle about 20,000 tonnes of waste and produce around 10,000 tonnes of renewable aromatic oil and 8,000 tonnes of sustainable by-products from it annually. Compared to conventional, fossil-based BTX production, the process is expected to cut greenhouse gas emissions of the resulting chemical building blocks by 70 to 80 percent.

“Reaching this key milestone in the development of BioBTX marks an important step in our journey towards our mission of making circular chemistry possible. I am very proud of the full BioBTX team and shareholders whose dedication and commitment has made this achievement possible. We are going to build our world’s first fully sustainable aromatic plant. A great accomplishment!” says Ton Vries, Co-founder and CEO of BioBTX.

This milestone concludes a 14-year journey from an idea in 2012 through lab- and pilot-scale to commercial execution. While this first plant focuses on mixed plastic waste, the ICCP technology is feedstock-flexible, with the potential to expand to other sources in the future, such as biomass.

The agreement marks a significant evolution in the two companies’ relationship – moving beyond traditional supply towards collaboration across the value chain, driven by a shared conviction that the future of mobility, energy and intelligent systems demands deep co-innovation. For Covestro, the partnership directly supports its “Sustainable Future” strategy by advancing innovations that enable circular solutions and drive growth in industries where material performance is becoming an increasingly important source of competitive advantage.

“At Covestro, we believe in the power of material science and collaboration to drive industry transformation – and this partnership with BYD is a strong example of that," said Lily Wang, President of Engineering Plastics at Covestro. "BYD's expanding portfolio represents some of the most exciting and demanding material challenges of our time, and that is exactly where Covestro’s depth of expertise becomes most valuable. We look forward to translating that expertise into tangible solutions together with BYD.”

“Covestro has proven itself as a trusted material innovation partner, and this agreement reflects our confidence in taking that relationship to a new level,” said Head of Materials, BYD. “As we continue to push the boundaries of what is possible in future mobility and beyond, we look forward to co-innovating with Covestro to develop the advanced material solutions that will redefine future industries and accelerate our global ambitions.”

Material expertise complementing BYD's cutting-edge applications

Under the MoU, the two companies will deepen their collaboration across new energy vehicles, power batteries, public transportation, energy storage, and new technology applications. The partnership will include joint innovation initiatives, technology co-development and strategic investment opportunities.

Covestro will provide dedicated R&D resources to co-develop new material technologies, volume supply security, early access to new material innovations and customized technical support. BYD in turn commits to proactively engaging Covestro in new projects and technology roadmaps across its entire business portfolio.

Covestro’s world-class material expertise in polycarbonate and polyurethane solutions, backed by decades of experience in automotive and electronics application, complements BYD’s key application areas:

• New energy vehicles: Proven material solutions in lighting, premium interior and exterior, and intelligent electronic components, delivering both aesthetic and functional value for smart mobility.
• Power batteries & energy storage: Lightweight, high-performance materials that balance safety, thermal management, and cost efficiency across EV and residential applications.
• Next-generation technologies: High-performance polymer solutions engineered for extreme demands – combining lightweight construction, structural integrity, thermal and electrical management, and durability to enable complex technology platforms of the future. 

Building a more sustainable industrial future

Beyond product co-development, the two companies are committed to advancing low-carbon and circular material solutions that reduce the environmental footprint of next-generation mobility, energy and intelligent systems. Covestro’s CQ (Circular Intelligence) labeled materials, made with at least 25 percent alternative raw materials, form a key part of this commitment.

With the acquisition, Covestro expands its production footprint for HDI derivatives and reaffirms its commitment in two important regions, while strengthening its ability to serve customers in the coatings and adhesives industry with greater flexibility and reliability.

HDI derivatives are essential building blocks for high-performance polyurethane coatings, adhesives and sealants. They are used in a broad range of applications, including automotive coatings, protective coatings for infrastructure, marine coatings, wood furniture, electronics and other demanding industrial applications.

“By adding these sites in Thailand and the US, we are strengthening our regional production capabilities and improving our ability to supply customers from locations close to them,” said Thomas Roemer, Head of the Business Entity Coatings and Adhesives at Covestro. “Reliable supply, regional availability and technical expertise are critical for our customers, especially in a challenging market environment. This acquisition helps us deliver even better on those needs.”

The two sites complement Covestro’s existing production network for HDI derivatives in major regions including Europe, Asia and North America. The additional capacities will further enhance Covestro’s ability to respond to customer demand and support long-term growth in high-performance and more sustainable coatings and adhesives applications.

“Strong customer relationships are built on trust, reliability and the ability to deliver value over time,” said Monique Buch, Chief Commercial Officer of Covestro. “This acquisition strengthens our position in a business where customers count on us for consistent quality, regional supply and application expertise.”

The acquisition follows Covestro’s earlier acquisition of the Resins & Functional Materials business from DSM and continued investments in organic growth, underlining the company’s commitment to the coatings and adhesives industry.

Fossil-based aniline production generates approximately 20 million tonnes of CO₂ emissions annually worldwide. To specifically reduce the carbon footprint of aniline production, Covestro uses a tailored microorganism in its bio-based process that converts industrial sugars from plant-based biomass into an intermediate product through fermentation. In a second step, chemical catalysis converts this intermediate into aniline with 100% plant-based carbon.

Continuous Fermentation Process: A Technological Breakthrough

Bio4PURConti aims to take this a step further: instead of the fed-batch method used so far, in which raw materials are added and product harvested in stages, the project targets a continuous fermentation technology for the first time. By using plant-based sugars, e.g. from hardwood biomass, it offers a renewable feedstock pathway. The resulting bio-based aniline is fully drop-in compatible with existing polyurethane value chains, meeting MDI specifications without requiring changes to downstream processes, making it a powerful lever for defossilization well beyond the chemical industry itself. The project scales from lab to 1.5 m³ semi-industrial demonstration at Bio Base Europe Pilot Plant (Ghent) and Covestro (Leverkusen), integrating cell recycling, real-time analytics and downstream processing. Key objectives include higher space-time yields and significant improvement in product carbon footprint.

"Bio4PURConti is a landmark project – not just for Covestro or the aniline market, but for the entire field of industrial biotechnology," says Dr. Markus Dugal, Head of Process Technology at Covestro. "Demonstrating continuous fermentation at semi-industrial scale for a high-volume raw material like aniline will set a new benchmark for what biotech processes can achieve in the chemical industry. Biology and engineering, when combined at scale, can fundamentally reshape how we produce the materials the world depends on."

A Consortium Driving European Biotech Leadership

The 10-partner consortium, spanning 7 countries, brings together leading industrial and academic organisations: Covestro Deutschland AG (Germany), Fibenol Imavere OÜ (Estonia), University of Stuttgart (Germany), Bio Base Europe Pilot Plant VZW (Belgium), Center for Advisory Systems in Technology, Dortmund e.V. – ZEDO (Germany), Norwegian University of Science and Technology – NTNU (Norway), Axel'One (France), VTT Technical Research Centre of Finland Ltd (Finland), Cluster Industrial Biotechnology – CLIB (Germany), and Asociación Española de la Innovación en el Marketing y la Inversión Sostenible – AEIMIS (Spain).

The project has a total budget of €8.4 million, with €7 million in EU funding, and runs for 42 months. Together, the consortium aims to significantly reduce the Product Carbon Footprint (PCF) of aniline in the future. As one of the world's leading aniline producers with a production capacity of over one million tonnes per year, Covestro is uniquely positioned to drive this transformation towards a more sustainable aniline production.

Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the Circular Bio-based Europe Joint Undertaking (CBE JU). Neither the European Union nor the granting authority can be held responsible for them.
This project has received funding from the Circular Bio-based Europe Joint Undertaking under the European Union's Horizon Europe research and innovation programme under Grant Agreement No. 101292477.

The project is supported by the Circular Bio-based Europe Joint Undertaking and its members.

ISCC PLUS-certified chlorine from Covestro is produced by using electricity from renewable sources, supporting a more sustainable production process and contributing to lower greenhouse gas emissions.

As of January 2026, the entire CR production of ARLANXEO is based on ISCC PLUS-certified chlorine, marking an important milestone in the company’s sustainability journey and its commitment to a more sustainable value chain. 
This transition is resulting in an average reduction in global warming potential (GWP) of approximately 20% compared to 2025 levels¹, depending on the specific product grade.

“Integrating ISCC PLUS-certified materials into our production is a key step in reducing the environmental footprint of our CR rubber products,” said Niels van der Aar, Head of Sustainability at ARLANXEO. “It underlines our commitment to supporting customers with more sustainable material solutions while advancing transparency along the value chain by supplying corresponding product environmental footprint data for ARLANXEO’s entire CR product portfolio.” 
As a key chemical supplier to ARLANXEO, Covestro plays a crucial role in enabling this transition by supporting the availability of ISCC PLUS-certified chlorine.

“At Covestro, we support our customers in reducing emissions along the value chain by supplying more sustainable basic chemical raw materials from our multiple ISCC PLUS-certified production sites,” said Moritz Winterstein, Head of Trading Cluster Basic Chemicals EMEA at Covestro. “Our collaboration with ARLANXEO demonstrates how certified raw materials and renewable electricity can contribute to lowering the product environmental footprint of downstream applications and support customers in achieving their sustainability targets.”

The introduction of ISCC PLUS-certified feedstock, like ISCC PLUS Chlorine, strengthens the position of ARLANXEO as a leading supplier of more sustainable elastomer solutions, particularly for industries with ambitious climate targets, such as automotive, construction, industrial and adhesive applications.

In addition, ARLANXEO can also offer Baypren® Eco grades combining ISCC PLUS-certified chlorine and ISCC PLUS-certified butadiene, enabling further reductions¹ in environmental impact and supporting customers in achieving their sustainability targets without any compromise in performance.

_{¹ Relative changes in Global Warming Potential – GWP100 incl. biogenic [kg CO₂e] 
Example of the relative change of the Global Warming Potential (GWP100 incl. biogenic [kg CO₂e] for Baypren^® 116 M45 as from January 2026. In the graph also the Baypren^® Eco 116 M45 is added as Eco option. A full Product Environmental Footprint report is available upon request.}

The successful implementation exemplifies how “The Material Effect” elevates materials into solutions that matter. This was achieved through an innovative partnership between Toyota Motor Corporation, Toyota Motor Kyushu, INC., parts supplier Kojima Industries Corporation, and Covestro. Together, the four companies conducted comprehensive testing and evaluation to ensure the recycled material met all performance requirements without compromising quality standards.

Integrating high levels of post-consumer recycled content into visible premium interior parts has typically been a high technical hurdle - making use in such areas difficult with many resins - yet the Bayblend® resin used in the LEXUS ES demonstrates that this barrier can be overcome. This marks one of the first integrations of 35% post-consumer mechanically recycled content in visible components within a premium automotive segment.

Meeting Performance Standards 

By fusing premium materials with specialized expertise, Bayblend® T85X R35 CQ delivers on all specifications for multiple Lexus ES interior parts while incorporating post-consumer recycled content. The material delivers essential performance characteristics including durability, surface quality, dimensional stability, and processability while integrating seamlessly into existing manufacturing processes.

"This collaboration demonstrates that more sustainable materials can meet the required standards of premium automotive applications," said Fumihiro Togashi, Global Strategic Account Manager, Toyota Group at Covestro. “By working closely with Kojima Industries Corporation, Toyota Motor Corporation, and Toyota Motor Kyushu, INC. throughout the development process, we've proven that environmental responsibility and product excellence can go hand in hand.”

The material's versatility extends beyond pre-colored applications to paintable components, enabling use in both visible interior areas and exterior parts. Covestro ensures consistent quality and supply reliability by utilizing one of the most dependable post-consumer recycled sources in the plastics industry. The company's global production footprint further enhances cross-regional supply stability and provides capacity to support anticipated volume increases as more sustainable automotive materials gain broader market adoption.

Advancing Circular Economy Goals

This adoption aligns with the four companies' sustainability strategies. Covestro positions the circular economy as a strategic pillar and continues expanding related product families. Toyota Group leads industry initiatives in environmental stewardship and resource circularity. In parallel, Kojima Industries Corporation and Kojima Group drive sustainability across manufacturing and supply chains, supporting circular material use and responsible sourcing.

The partially recycled plastic solution supports fulfilling expected quotas related to the ELV Regulation, demonstrating how more sustainable materials can simultaneously meet performance and regulatory requirements in the automotive industry.

Looking Ahead

Covestro continues expanding its circular economy solutions through “The Material Effect” approach, including the recently launched "RV line”, part of the post-consumer recycled R series – featuring recycled end-of-life vehicle materials such as headlamps, with third-party certification. These developments address critical automotive industry challenges amid tightening environmental pressures and regulatory requirements.

The innovations will contribute to EU ELV recycling targets toward 2032. Through its global production and supply network, Covestro supports decarbonization and resource circularity in mobility while enabling automotive manufacturers to meet evolving regulations without compromising product quality - truly elevating materials into solutions that matter.

Across modern football, materials play a role in helping enable speed, control, comfort, durability and reliable performance, from equipment and apparel to infrastructure and digital connectivity.

Covestro is highlighting this “material effect” behind football: the often unseen contribution of material science to the way the sport is played, experienced and connected around the world.

The athletes enabled by materials

Modern football has become faster, more precise and more connected. Players sprint more, press harder, change direction faster and perform under intense physical and mental pressure. Behind this evolution are better training methods and data analytics, but also materials that help make high performance more reliable.

The football itself is a good example. Modern balls use advanced materials, carefully engineered surfaces and precise construction methods to support consistent weight, shape, rebound and flight behavior, even under demanding weather conditions. Compared with traditional leather balls, today’s footballs are designed for greater reliability and more predictable performance.

Footwear has also changed fundamentally. Modern football boots combine lightweight uppers, flexible structures and high-performance sole plates to support grip, acceleration, agility and ball control. The contact between player, pitch and ball has become a highly engineered interface.

Sportswear plays its part as well. Lightweight, breathable and durable textiles can help manage moisture and comfort during high-intensity performance. Covestro’s INSQIN^® waterborne polyurethane technology enables high-performance textile coatings that can provide softness, water resistance and long-lasting performance while supporting more sustainable manufacturing approaches.

Materials beyond the pitch

The material effect extends beyond players and equipment. Stadiums, training facilities and broadcast infrastructure also depend on advanced materials.

Lightweight and durable polycarbonate solutions have been used in large-scale roofing applications. They can help create weather-resistant structures that protect spectators while reducing weight and maintenance requirements.

At the same time, football is becoming increasingly digital. From connected match technologies and live analytics to broadcast systems, streaming platforms and fan experiences, every match depends on the reliable flow of data. Advanced polymer materials help protect cables, connectors and electronic components and support the infrastructure that brings the game to fans around the world.

As sport becomes more connected, the infrastructure behind it becomes more demanding. Data centers, communication networks and electronic systems require materials that can support reliability, protection and performance at scale.

Innovation is a team sport

The evolution of football shows how performance is rarely the result of a single factor. It comes from the interaction of talent, preparation, technology and the right materials.

The same applies in business. As customer challenges become more complex and markets move faster, innovation increasingly depends on collaboration across disciplines, industries and value chains.

“Innovation today needs to be fast, focused and collaborative,” said Monique Buch, Chief Commercial Officer at Covestro. “Co-creation with customers works much like collaboration in a football team: different strengths come together around one shared goal, focusing their preparation to secure the win, and trust and speed making the difference.”

From the pitch to the stadium and from equipment to digital infrastructure, football shows how advanced materials can help shape performance where it matters most.

The Asia-Pacific TPU market, particularly in South China, continues to see strong demand from fast-growing sectors such as consumer electronics, automotive and specialty films. The Guangzhou AD Center strengthens the company’s ability to translate this demand into tailored material solutions through closer technical collaboration with customers.

“This new Application Development Center represents a strategic cornerstone in our global TPU strategy to grow in high-value and emerging segments in Asia-Pacific,” said Dr. Andrea Maier-Richter, Global Head of TPU at Covestro. “We will explore, pilot and upscale new application fields for TPU in robotics, healthcare and mobility solutions together with our customers – in close collaboration and at the heart of the market.”

Capabilities designed for speed and precision

The center is designed to help customers move faster. Its processing simulation lines replicate real production conditions in extrusion and injection molding, enabling rapid formulation adjustments and material modification. These capabilities help reduce trial cycles, shorten time-to-market, and deliver solutions tailored to specific application needs.

“Asia is home to some of the world’s most dynamic and fast-moving industries, and our customers here expect partners who can keep pace with them. This center is our answer to that, bringing together our cross-business capabilities under one roof right here in South China,” said Holly Lei, President Covestro China. “It also reflects our deep commitment to this market and our belief that true innovation happens when you are close to your customers and the industry.”

Unlocking value through cross-business synergies

A distinctive feature of the Guangzhou AD Center is its multi-business setup, with Engineering Plastics (EP) and Specialty Films (SF) teams co-located on the same site, enabling close collaboration and faster integration of capabilities. The EP unit brings compounding expertise and color competence, supporting in-house color matching for applications such as consumer electronics, footwear and paint protection films (PPF). The SF unit enables pilot production and finished product commissioning for high-performance films and other extrusion-based applications. This integrated approach brings together capabilities across business entities, creating added value for customers.

“Innovation at Covestro is led by our markets and always strives to combine our global strengths across the business entities for our customers,” said Dr. Christian Haessler, Head of Global Innovation TPU at Covestro. “TPU is a material for a more sustainable future, and the Guangzhou AD Center will enable the development of highly versatile and recyclable TPU material solutions in one of the most dynamic innovation ecosystems worldwide.”

The Guangzhou AD Center is now open for customer and partner collaboration across Asia-Pacific, offering end-to-end customer support from initial material consultation to pilot production and troubleshooting.

The new compressor operates on the principle of a heat pump: Water vapor is generated during the production processes for TDI, a component of flexible foam. Covestro requires steam for many production processes, but the steam produced during TDI manufacturing is not hot enough. Therefore, some of it is released into the environment as waste heat. The compressor raises the steam to a higher temperature and pressure level, making it suitable for use in production processes.

“Energy efficiency is a key lever for transforming our production towards climate neutrality and a circular economy. The principle is: the less energy we need, the better,” says Thorsten Dreier, CTO of Covestro. “That’s why we’re using every opportunity to make our production even more energy-efficient with modern, innovative process technologies.” From 2005 to 2022, Covestro already reduced its energy consumption by around 40 percent. The next goal: By 2030, the company aims to consume 20 percent less energy per ton of product produced than in 2020.

This project is part of an energy efficiency strategy with which Covestro is driving its transformation to climate-neutral production. As part of the master plan, the company is continuously searching for further potential energy efficiency measures. “With these projects, we are not only reducing our CO₂ emissions, but also saving on energy costs,” says Andreas Doerfer, Global Energy Excellence Manager. “To achieve our energy efficiency target, we must utilize all available options for using the waste heat generated in our processes to manufacture our products.”

Following the installation of an energy-efficient reactor at the TDI plant last year, the new compressor for the Dormagen site is the next major project to future-proof the location: “This investment clearly demonstrates Covestro’s long-term belief in the Dormagen site and its commitment to investing here,” says Philip Bahke, Head of Operations in Dormagen and North Rhine-Westphalia.

Construction is scheduled to begin at the end of this year, with the compressor expected to go into operation in mid-2027.

The investment in this entirely new site, originally announced in 2023, marks a significant milestone in Covestro’s region-for-region strategy and its commitment to growth in its Solutions & Specialties business. The Zhuhai site will be developed in three phases across a 45,000-square-meter area, with maximum production capacity estimated to reach 120,000 tons a year upon completion of the final phase, expected in the 2030s. This will then make it the company’s largest TPU production facility globally.

“The inauguration of our Zhuhai site represents a pivotal moment in Covestro’s growth strategy. This investment demonstrates our commitment to meeting the evolving needs of our customers across Asia Pacific while strengthening our position in high-growth markets,” said Monique Buch, Chief Commercial Officer of Covestro. “The facility will enable us to deliver innovative TPU solutions closer to our customers, enhancing our service capabilities and responsiveness.”

Regional synergies with nearby R&D and AD capacities

The Zhuhai site will be strategically supported by a regional TPU R&D Center in Changhua and a new TPU application development (AD) center in nearby Guangzhou, which integrate technical acumen with innovative solutions and tailored services. Together, these facilities are expected to generate powerful regional synergies through collaborative and complementary strengths, positioning Covestro optimally to serve its customers throughout the region.

“The site as well as the nearby R&D and AD capacities are state-of-the-art. Our site in Zhuhai furthermore significantly expands our global TPU production network and reinforces our strong market position in TPU in the region,” said Dr. Andrea Maier-Richter, Head of TPU at Covestro. “With our integrated regional setup combining production, fundamental research and customer-focused application development, we’re well-positioned to drive innovation and deliver tailored solutions that meet the specific requirements of diverse industries located in south China, like automotive, consumer electronics to footwear.”

“The Zhuhai site underscores Covestro’s long-term commitment to China and aligns with the country’s high-quality development and sustainability agenda. This investment further establishes Guangdong, with a particular focus on the Greater Bay Area, as Covestro’s strategic hub in China along with Shanghai, enabling us to deliver innovative solutions locally while supporting customers throughout Asia. We’re proud to contribute to China’s industry transformation and development as a reliable partner,” said Covestro China President Holly Lei.

The Zhuhai site is capable of producing TPU with the label “CQ”. Covestro materials with this designation contain at least 25 percent alternative, non-fossil raw materials, supporting customers in reducing their carbon footprint in final products, especially important in sectors such as electronics where sustainability has become a global trend.

For Schleswig-Holstein, the project represents an important step on the path to climate-neutral transformation of the state. This was emphasized by Tobias Goldschmidt, Minister for Energy Transition, Climate Protection, Environment and Nature of the state, at the groundbreaking ceremony: “The energy transition is Schleswig-Holstein's project of our time. The rapid expansion of renewable energies is a booster for our business location Schleswig-Holstein and makes future-oriented projects like the heat battery possible in the first place. Covestro and Rondo impressively demonstrate how they are driving the energy transition forward with innovative strength, technological know-how, and full confidence. Projects like this contribute significantly to energy sovereignty and to achieving our climate neutrality goals.”

The 100 MWh Rondo Heat Battery (RHB) is scheduled to go into operation by the end of 2026. Breakthrough Energy Catalyst and the European Investment Bank (EIB) are supporting the project. The battery will produce ten percent of the required steam at the site, saving up to 13,000 tons of CO₂ emissions per year.

"As an innovation company, we are always excited when we can further develop and test promising ideas that can bring us closer to our goals of a circular economy and climate-neutral production," says Dr. Thorsten Dreier, CTO of Covestro. "The heat battery is such an idea: a new technology that enables us to take another step forward on our path to a sustainable future."

The Rondo Heat Battery combines centuries-old materials with modern automation: electrical energy is stored in the form of heat – with the help of bricks that have been used as heat storage in steel mills for centuries. The heat drives an ordinary boiler that delivers emission-free steam. With electricity from renewable energy sources, a constant amount of steam can thus be continuously generated.

“This project shows how two of Europe’s central challenges can be solved together,” said Eric Trusiewicz, CEO of Rondo Energy. “As renewable power expands, it increasingly creates daily periods of abundant, low-cost electricity. At the same time, European industry needs reliable, affordable energy to remain competitive. Together with Covestro, we are demonstrating that clean industrial heat can be both highly reliable and a powerful tool for balancing the grid — while building the energy infrastructure needed to strengthen Europe’s industrial base and energy security.”

For Covestro, steam generation is an essential part of the production process and accounts for a large portion of energy consumption. The steam at the Brunsbüttel site is currently still generated with natural gas. Based on the experience with using the Rondo Heat Battery in Brunsbüttel, Covestro is evaluating whether deployment on a larger scale is possible.

Read more here ›

“For ten years, our people have proven that breakthrough innovations happen when curious minds meet courageous hearts,” said Markus Steilemann, CEO of Covestro. “I'm incredibly proud of our global team. Their passion, creativity, and resilience have formed the foundation of our culture. Thanks to their dedication, we continue to overcome challenges, seize opportunities, and create solutions that make the world a brighter place.”

A decade of transformation

Over the past decade, Covestro has achieved major milestones on its journey toward becoming a more innovative, sustainable, and resilient company. Since 2015, Covestro has invested more than 4 billion euros in expanding and modernizing its global operations, with a clear focus on sustainable production technologies. A significant step was the successful integration of DSM’s Resins & Functional Materials business, which strengthened Covestro’s position in sustainable coating solutions and broadened its customer base.

The company has driven forward key technologies for renewable-based raw materials, pioneered new chemical recycling methods for high-performance plastics, and signed 11 power purchase agreements to significantly increase the share of renewable energy in its operations. In recognition of its commitment to innovation and people, Covestro has repeatedly been named a top employer in multiple regions, including Greater China, where the company operates 10 production sites alone.

People and values at the core

Covestro’s success over the past decade is rooted in its purpose “to make the world a brighter place” and a corporate culture defined by its C³ values: Curious, Courageous, and Colorful. These values shape how the company approaches innovation and collaboration. Curiosity drives Covestro to explore new solutions; courage empowers teams to make bold decisions; and diversity of perspectives fosters creativity and resilience.

The company’s “We Are 1” culture reflects this spirit of collaboration and shared purpose, connecting more than 17,000 employees across regions, functions, and backgrounds. It is this collective mindset that has allowed Covestro to evolve from a newcomer in 2015 into a trusted global partner shaping sustainable material solutions.

Celebrating a global community

To mark its 10th anniversary, Covestro is celebrating with employees around the world and launching initiatives that reflect the company’s deep appreciation for its people.

In Germany, large-format posters are being installed in and around production sites as a visible expression of thanks to employees. These posters complement small gatherings and celebrations taking place at the sites and within the plants. In addition, Covestro, together with the Works Council, is supporting local food banks at its German sites with donations – a way to also say thank you to the communities, with a special focus on those in need. In addition, a specially designed Covestro-branded bus is now on the road in Leverkusen – featuring materials produced by Covestro itself, including polycarbonates in the windows, polyurethanes in the seats, and special coatings for the exterior surfaces. 
In North America, Covestro has initiated the “10 for 10” corporate volunteering campaign, aiming to reach 10,000 volunteer hours by September 2025. For every recorded volunteer hour, Covestro donates 10 meals to local food banks, with a goal of up to 100,000 meals in total. This initiative reflects the company’s ongoing commitment to supporting the communities where it operates.

Across China and the Asia-Pacific region, the anniversary celebrations focus on employee recognition and community engagement. Highlights include a video campaign capturing personal stories from employees who have shaped Covestro’s first decade, a photo initiative where colleagues form “10” or “We Are 1” shapes, and the “Well Together” wellbeing program, which encourages employees to participate in activities such as running, cycling, and hiking to promote health, teamwork, and inclusion.

Looking ahead

As Covestro enters its second decade, the company remains committed to driving innovation and shaping a sustainable future. Strategic priorities include achieving full circularity, reaching climate neutrality across operations, accelerating the shift from fossil-based to renewable raw materials, and expanding digital capabilities, including the application of artificial intelligence to improve efficiency and develop new solutions.

Partnerships will play a central role in this transformation. Under this lens, the potential partnership with XRG also plays an important role, where we aim to jointly drive innovation, expand sustainable material solutions, and strengthen our position in global markets. By working closely with partners across value chains, Covestro is determined to enable next-generation materials that address global challenges while supporting sustainable growth.

Covestro uses natural gas as a feedstock as well as an energy source. The partnership will enable the supply of natural gas sourced from INEOS’ global LNG portfolio, providing a stable and predictable feedstock and energy stream for Covestro’s European operations. This strategic collaboration addresses the critical need for secure and diversified energy sources in Europe.

David Bucknall CEO, INEOS Energy said: “Our goal is to supply customers with vital energy throughout the energy transition, not just at the end. That means maintaining competitive hydrocarbon supplies as alternatives emerge and grow. This long-term LNG deal with Covestro does exactly that, providing reliable, cost-effective energy to help our industrial partners manage volatility and avoid shortages."

Thorsten Dreier, Chief Technology Officer of Covestro, added, "Securing a stable, competitive and predictable gas supply is essential for our operations right now. This agreement with INEOS provides us with the long-term security we need to maintain our production and contribute to the European economy. We value INEOS' commitment to supporting European industry and their proactive approach to addressing the region's energy challenges. This contract is an important building block for us as a company in the energy intensive industry to transition towards an affordable renewable energy supply."

This agreement reinforces the shared goal of both companies to maintain a strong and competitive industrial base in Europe. By ensuring a reliable gas supply, INEOS and Covestro are taking real, tangible steps to secure the future of their European manufacturing assets.

INEOS first entered the LNG sector in June 2022, signing a 20-year agreement with US-based Sempra Infrastructure to supply 1.4 million tonnes of LNG annually from the US Gulf Coast.

"This new line of polycarbonate represents a significant step in supporting the automotive industry's transformation towards a circular future," said Lily Wang, Global Head of the Engineering Plastics Business Entity at Covestro. "By offering high-quality PCR materials derived from end-of-life headlamps, we're enabling our customers to meet increasingly stringent regulatory requirements while contributing to closed-loop recycling of automotive plastics."

Under this initiative, Covestro has been collaborating with partners, including Chinese recycler Ausell and leading automakers, to establish closed-loop pathways for high-value plastics from end-of-life vehicles (ELVs). This program focuses on strengthening recycling processes and establishing reliable supply chains for high-quality recycled materials from automotive waste streams. Through this partnership, Covestro and its value chain allies have developed practical solutions for collecting and mechanically processing end-of-life headlamps into high-quality PCR grades suitable for a range of automotive applications.

"This partnership underscores the importance of cross-sector collaboration in driving the circular economy forward," said Martin Hansen, Regional Director of GIZ in East Asia. "By bringing together key industry players, we are not only creating viable solutions for recycling high-value plastics from end-of-life vehicles but also fostering innovation that supports a sustainable, closed-loop material flow in the automotive industry."

The introduction of these new PCR grades comes at a critical time as the automotive industry, one of the most resource-intensive sectors, faces increasing environmental challenges and regulatory pressures. The EU's End-of-Life Vehicle Directive, which sets recycling targets, along with China's Extended Producer Responsibility (EPR) program and growing sustainability requirements in key global markets, are pushing automotive manufacturers worldwide to seek innovative and sustainable material solutions that comply with evolving regulations.

Covestro’s new PCR grades meet the high-performance standards required for demanding automotive applications, offering excellent surface quality for superior aesthetics and adhering to strict Vehicle Interior Air Quality (VIAQ) requirements. This combination of sustainable content and premium performance empowers automotive manufacturers to meet both regulatory demands and environmental goals without compromising on product quality.

As part of its broader commitment to sustainability and the circular economy, Covestro continues to expand its portfolio of recycled-content materials. In recent years, the company has introduced PCR polycarbonates with up to 90 percent recycled content, and opened its first dedicated mechanical recycling compounding line for polycarbonates in Shanghai. Last year, it introduced a new range of polycarbonates based on chemically recycled, attributed material from post-consumer waste via mass balance for the first time.

"With our automated laboratory, we can work together with our customers on the future of coatings and adhesives. Because it operates almost completely autonomously and learns from our existing knowledge and data lake as well as newly generated data, it makes the process of optimizing and developing formulations many times more efficient and precise. This allows us to optimize existing formulations faster or even develop completely new formulations for and together with our customers. We can say: We are reaching a new level of modern research," says Thomas Büsgen, head of the laboratory.

Testing Formulations with Covestro Binders and Crosslinkers 

Specifically, the new laboratory will test formulations with Covestro binders and crosslinkers for coatings and adhesives. Their clever selection ensures properties such as hardness, adhesion, opacity, gloss, or durability. Such formulations typically consist of seven to 15 components, whose combination determines the properties of the final product. The resulting high number of possible combinations means that standard formulations are usually used. The new laboratory now enables more extensive test series, also thanks to the computer-aided design of test series and the use of automation.

"Our new automated laboratory gives us more possibilities for testing formulations. It relieves our specialized laboratories of their standard tasks and can analyze samples more systematically. This allows us to focus our expertise and experience even more on customer-specific topics or try approaches we couldn't have implemented otherwise," says Martin Merkens, Head of Sales & Market Development EMLA in Covestro's Coatings and Adhesives business entity. “This will particularly help us in the area of circular economy: Alternative raw materials, for example bio-based or recycled materials, can be tested faster and evaluated for their properties in the final product.”

Facility to Run Tens of Thousands of Tests Annually 

The new facility can operate 24 hours a day, 7 days a week. The goal is to run tens of thousands of tests annually. This sets a new standard in terms of number, variety, precision, and testing speed. Another advantage: The automated laboratory generates a large amount of structured data. The knowledge about formulation possibilities and influencing factors thus will grow rapidly. The collected data, combined with measurement data from existing studies, is evaluated using special machine learning algorithms to further improve formulations. Artificial intelligence is also used to predict new experiments based on property goals and simultaneously verify them in the automated laboratory – creating a self-learning system.

In addition to formulating water- and solvent-based 1K and 2K systems, the automated laboratory also performs numerous material tests on the raw materials themselves, their formulations, and applied films. Application can even take place in different climates in the lab to simulate product use under application conditions. The progressing laboratory digitalization across Covestro also enables easy forwarding of generated samples to more specialized testing laboratories. This makes it possible to supplement the datasets with market-specific test results and identify relevant dependencies more quickly.

Covestro at European Coatings Show 2025 in Nuremberg 

At the European Coatings Show from March 25-27 in Nuremberg, experts from application development and segments such as automotive, printing & packaging, or construction & architecture will be present to discuss new, joint approaches made possible by the laboratory with customers. Visit the company's booth in Hall 4A, Stand 438. There you can learn more about the laboratory and other innovative material solutions and technical developments for the coatings and adhesives industry.

Follow further updates on this topic here. 

"The successful completion of this project shows that climate protection and competitiveness can go hand in hand," says Dr. Philip Bahke, Head of the North Rhine-Westphalia Site Network. "The modernized plant sets new standards in energy efficiency and underlines our path toward climate-neutral production. In light of persistently high energy costs, the project significantly strengthens the competitiveness of TDI production in Europe. My special thanks go to the entire project team, who professionally implemented this complex modernization during ongoing operations."

More Efficient Processes for More Sustainable Products

The modernized plant consumes 80 percent less energy than conventional processes, achieving a CO₂ reduction of 22,000 tons per year. This is made possible by a new reactor weighing over 150 tons (330,700 lbs) and almost 20 meters (65.6 feet) high, which uses the generated reaction energy for steam production. Covestro started the modernization in summer 2023. In total, the project installed over 3.5 kilometers of new pipelines, around 14 kilometers of cables, and hundreds of new equipment, valves, and monitoring instruments in the plant.

"In Dormagen, we operate Europe's largest TDI production plant. With the successful modernization, we can now offer our customers TDI with an even better carbon footprint," explains Dr. Christine Mendoza-Frohn, Head of Sales Performance Materials for the EMEA and LATAM regions. "This supports our customers in achieving their own sustainability goals and strengthens our position as a reliable partner for climate-neutral and circular solutions."

New Global Energy Efficiency Targets Presented

During the event, Covestro also presented its new, ambitious energy efficiency target for global production. The company targets a 20 percent reduction in CO₂ emissions from energy use per ton of product by 2030 compared to 2020, underlining the central importance of energy efficiency as a lever for achieving operational climate neutrality by 2035. The Dormagen TDI plant, with its annual capacity of 300,000 tons, serves as a prime example of the successful transformation of existing production facilities toward greater energy efficiency.

The Federal Ministry for Economic Affairs and Climate Action (BMWK) has supported this modernization through its federal funding program for energy and resource efficiency.

Further press release:

• Covestro publishes energy efficiency target ›

“While the decision to shut down the PO11-unit is difficult, we must ensure all assets within our portfolio are a long-term strategic fit,” said Aaron Ledet, executive vice-president I&D and Supply Chain at LYB. “We are prioritizing our core assets which play a key role in our technology differentiation and circularity strategy or provide attractive returns over the cost of capital. We take our obligations towards our employees, European employee reps, councils, and unions seriously. We have engaged with them in line with these obligations and will continue to do so. We would like to thank them for the constructive dialogue. We are also in communication with customers, suppliers and other parties across the value chain and will continue to do business as usual. There is no change to our working relationship, and we continue to focus on providing an exceptional customer and supplier experience.”

"As part of our Sustainable Future corporate strategy, we’re continuously working to optimally position Covestro to be a reliable partner for our customers and to operate competitively in a challenging market environment," said Hermann-Josef Dörholt, Head of the Performance Materials Business Entity at Covestro. "Due to global overcapacities, persistently weak demand, and high costs in Europe, we have jointly decided with LYB to close the PO11 plant. We will support LYB in implementing this change as socially responsibly as possible. At the same time, we remain committed to the European market and will continue to supply customers with our renowned polyether polyols portfolio.”

The Maasvlakte site, a joint venture between LYB and Covestro, has been operational in the Rotterdam region since 2003. Between now and the end of 2026, LYB will carry out a process to safely shutdown and prepare the demolition of the asset.

In 2024, LYB announced a strategic review of European assets of its Olefins & Polyolefins (O&P) and Intermediates & Derivatives (I&D) business units. LYB has taken the next step in evaluating the option to seek alternative ownership for the O&P sites in the strategic assessment. At this time no decisions have been made and various outcomes remain possible.

"The new production facilities are equipped with state-of-the technology to enable an efficient production and thereby reduce our CO₂ emissions," says Thorsten Dreier, Chief Technology Officer of Covestro. “With the expanded capacity, we can meet our customers' growing demand for innovative specialty films, especially in medical technology, in the region Asia-Pacific and strengthen our Solutions & Specialties segment."

Covestro has been operating a production facility for Specialty Films in Thailand since 2007. The range comprises polycarbonate films from the Makrofol^® range and Bayfol^® products made from polycarbonate blends. These high-performance specialty films are used in many applications across multiple industries, such as healthcare, mobility and Identification Documents.

“The new production facilities are important to us because it enables faster time to market and at the same time expands our market access in Asia-Pacific.” says Aukje Doornbos, Global Head of the Specialty Films business entity. “With market-focused innovations and a stronger customer orientation we want to drive growth for Covestro.”

Since 2022, the Map Ta Phut site is ISCC PLUS certified, enabling it to manufacture and supply mass-balanced products. With the mass balance approach, bio-based or recycled raw materials are fed in at an early stage of raw material extraction and mathematically allocated to the finished products. This saves fossil raw materials and reduces CO₂ emissions, while the quality of the mass-balanced products remains identical to that of purely fossil-based products. With this drop-in solution, manufacturers can continue to use their proven formulations, equipment, and processes.

ISCC is an internationally recognized sustainability certification for biomass and bioenergy. The standard covers all stages of the value chain and is used worldwide. Customers can use these products in their established processes and apply them to meet their sustainability goals. In addition, Covestro already offers a range of films made partly with plant-based raw materials or partly from recycled plastics.

“We are honored to be recognized as a Top Employer in China for seven years in a row. This achievement underscores our employee-focused approach and ongoing efforts to create an inclusive, supportive and empowering workplace,” said Holly Lei, President of Covestro China.

In 2024, Covestro China introduced several initiatives to foster leadership and employee growth. The “Manager Enabling” program engaged people managers through case studies, role-playing and interactive games, equipping them with tools to apply Covestro’s cultural behaviors, identify moments that matter in the employee lifecycle, and enhance employee conversations. Meanwhile, the “Leadership Foundation Program for Shift Leaders” has supported over 80 frontline leaders at Covestro Integrated Site Shanghai in strengthening their leadership skills and advance their careers. Both programs received widespread acclaim, reinforcing Covestro’s emphasis on leadership development at all levels.

The company has also built a comprehensive well-being system that addresses physical, mental, social and environmental dimensions. The first-ever Well-being Week held in October 2024 featured activities such as healthy food competition, well-being talent showcases and health lectures at sites and offices across the nation. On top of that were family outings, sports events and beach clean-ups held nationwide, fostering a sense of belonging and boosting employee morale.

“At Covestro, we view our employees as whole individuals, not just as a workforce, valuing their personal growth and well-being alongside their professional contributions. Our goal is to empower them to create value for the company while growing personally,” said Lesley Lin, Head of Human Resources, Greater China.

The Top Employers Institute program certifies organizations based on the participation and results of their HR Best Practices Survey, which covers six HR domains consisting of 20 topics, including people strategy, work environment, talent acquisition, learning, diversity, equity and inclusion, and well-being.

After three successful years as head of Performance Materials Operations APAC, Dr. Yun Chen will assume the role of production head for Covestro's European sites starting in February. The chemical engineer, who earned his doctorate in Germany, began his professional career at the Krefeld-Uerdingen site. With more than three decades of experience in various positions at Covestro and Bayer, Chen brings not only technical expertise but also comprehensive international industry knowledge and long-standing leadership experience.

"I would like to sincerely thank Daniel Koch for his excellent work and commitment over the past years. I wish him all the best for his future career," says Hermann Dörholt, Head of the Performance Materials Business Entity at Covestro. "At the same time, I am delighted to welcome Yun Chen in his new role as head of our production in Europe. His leadership skills, comprehensive industry knowledge, and not least his impressive achievements as production manager in the Asia-Pacific region make him the ideal candidate for this important position. With his many years of experience and international perspective, I am confident that Yun will successfully guide and develop our European sites through the current challenges."

Focus on Safety, Reliability, and Efficiency

"The chemical industry in Europe faces numerous challenges and, like Covestro, is in the midst of a transformation. In the coming years, we will make our production even more reliable and efficient and drive the transition to climate neutrality and a circular economy. I look forward to tackling these challenges together with our dedicated team. The current developments also offer numerous opportunities, for example through the increased use of digitalization and artificial intelligence," says Chen.

"I want to bring in my experiences from Asia while also benefiting from the expertise of our European colleagues. I am particularly focused on the safety of our employees and production facilities. It therefore remains the foundation for our daily actions," Chen adds.

Long-standing Experience at Covestro

In his nearly 30 years of experience, Dr. Yun Chen has held numerous leadership positions within the group. After studying chemical engineering in Beijing and Shanghai, Chen earned his Ph.D. at the Institute of Organic Chemistry at the Technical University of Darmstadt. In 1994, he began his career with Bayer AG at the Krefeld-Uerdingen site. Here, he took on various positions with increasing responsibility.

In 2001, Chen moved to Shanghai, where he helped build up polycarbonate production as plant manager and from 2008 took over production and technology management for the corresponding business unit. In 2017, Chen was appointed Senior Vice President and Head of Covestro Integrated Site Shanghai (CISS), the company's largest single production site worldwide. Most recently, in 2021, he took on the additional role of Production Manager Performance Materials Asia Pacific.

“Trust, fairness, and equality are central values for us as an employer. By publishing salary ranges in our job postings, we demonstrate that we live by these values, take the concerns of applicants seriously, and promote an open and fair dialogue,” says Sophie von Saldern, Global Head of Human Resources at Covestro. The company’s existing workforce also benefits from this transparency, as salary bands are accessible internally.

Benefits for All: Greater Efficiency, Transparency, and Fairness

This new approach goes beyond positioning Covestro as a transparent and fair employer – it fundamentally transforms the entire recruitment process. The initiative was initially piloted in engineering roles, where there is a significant skills shortage. The positive results from the pilot encouraged Covestro to extend the publication of salary ranges to all job advertisements.

“We’re already seeing early indications of increased application numbers. At the same time, the recruitment process is becoming more focused, and we’re receiving positive feedback from candidates. Applicants are assessing themselves within the salary range based on their qualifications and experience, which leads to more efficient and transparent discussions,” reports Dr. Ute Breitsohl, Head of Employer Branding & Recruiting in Germany.

Job seekers benefit from this transparency in several ways: Entry-level professionals gain clear guidance on salary expectations.
Experienced professionals can recognize the value placed on their expertise and directly discuss opportunities for development, including financial ones.
Women, who often undervalue themselves in salary negotiations, benefit from clear salary bands. For all profiles, the disclosure of salary structures allows applicants to immediately determine whether a position is financially attractive and suitable. “Our goal is to create a fair and open basis for discussion right from the start. In this way, we contribute even more to an application process at eye level,” explains Dr. Breitsohl. “The positive response from applicants confirms that our transparent approach creates trust. This enables us to focus more on development prospects and career goals in interviews.”

This initiative strengthens Covestro's position as an attractive employer. At the same time, Covestro is actively sending a signal to the labor market to raise awareness of the gender pay gap. “Only if salary ranges are disclosed transparently and comprehensibly can comparability be achieved across gender boundaries. With this step, Covestro is setting new standards for fairness and equality in the world of work,” Breitsohl continued.

Early Implementation of the EU Pay Transparency Directive

By publishing salary ranges in job postings, Covestro is preemptively fulfilling a requirement that will become mandatory for many companies in Germany by 2026. The forthcoming EU Pay Transparency Directive will oblige employers to disclose salary information during the recruitment process.

Sophie von Saldern, Global Head of Human Resources at Covestro, highlights the strategic intent behind this move: “We see publishing salary ranges not just as preparation for future legal requirements but as a strategic tool to strengthen our employer brand. The collective bargaining agreements in the chemical industry already provide attractive conditions—our additional transparency creates a win-win situation for applicants and our company.”

More targeted applications, positive feedback from departments, fewer time-consuming salary negotiations, and greater fairness: these indicators underline the success of this initiative and Covestro’s leadership role in promoting transparency and fair working conditions.

Interested candidates can find all current job postings with corresponding salary ranges on Covestro’s career page at www.career.covestro.com. The website also provides further information about Covestro as an employer and the diverse development opportunities within the company.

Construction is set to begin in late 2024, with the facility expected to become operational in 2025. The center will be outfitted with advanced equipment to address complex market demands and leverage local resources and networks to streamline talent and administrative management.

“Establishing this new application development center in Guangzhou is a strategically important move for us to jointly with our customers leverage on the vibrant Asia-Pacific and especially the Chinese market. The center will also contribute to developing more sustainable TPU solutions, underscoring our dedication to innovation that benefits our esteemed customers and partners,” said Dr. Andrea Maier-Richter, EVP and Global Head of TPU at Covestro. “Together with the ongoing investment in our largest global TPU production site in Zhuhai, we will soon run two powerful engines in two major cities. This highlights our company’s ongoing commitment to growth and its commitment to the innovative capabilities of TPU in particular.”

With the existing regional R&D center in Changhua, the ongoing construction of the largest global TPU production site in Zhuhai and the upcoming APAC application development center in Guangzhou, the collaborative and complementary strengths from the three sites are expected to drive even more powerful regional synergies.

“The new application development center in Guangzhou will play an instrumental role in engaging with major TPU industry clusters across China and APAC, particularly in consumer electronics and specialty extrusion applications,” said Kevin Ho, Head of Sales & Market Development for TPU in APAC at Covestro. “We are not only close to these industry clusters, we are also at the forefront of listening to our customers, partners and the industry value chain. By bolstering our AD capacities, we ever better can sense and meet the nuances and changes and navigate our solutions and services with velocity, agility and customer centricity.“

Covestro is committed to offering sustainable and circular solutions that align with its long-term goals. The Desmopan^® CQ TPU portfolio is a great example, utilizing alternative raw materials such as feedstocks from waste or biomass, attributed via mass balancing. The company as a whole furthermore aims to become fully circular and aims at becoming operationally climate neutrality by 2035, striving to utilize only renewable energy for its operations by then. This lowers the carbon footprint of products like TPU even further. This dedication of the company is also reflected in the investments in its new TPU properties, where such developments shall be driven further.

“We are excited to partner with Li Auto and support their pursuit of intelligence and electrification in automobiles,” said Guido Naberfeld, Senior Vice President, Head of Sales and Market Development Mobility at Covestro, during the MOU signing event at Covestro’s integrated production site in Shanghai. “By leveraging our expertise in engineering plastics and circular solutions, we aim to enable innovative future-oriented mobility solutions and reshape automotive material cycles, driving the industry towards a smarter and more circular economy.”

Under the MOU, Covestro and Li Auto will establish a “Joint Innovation Platform” to drive the development and application of more sustainable engineering plastics with alternative feedstocks, such as bio-waste and recycled sources, across various automotive components. Key initiatives will involve integrating materials attributed with bio-circular content through mass balancing into automotive lighting, functional interior and exterior parts, and smart system components. The two sides also agreed to explore innovative processes and business models for using recycled lighting materials in new automotive parts together with value chain partners.

Under the joint platform, the two sides also seek to deepen their collaboration in developing lighting, smart systems, and thermal management solutions. This will include high-performance optical-grade materials, smart surface technologies and thermally conductive solutions.

“Li Auto is dedicated to implementing the ‘Smart + Electric’ strategy with innovative materials and designs, aiming to offer users a safer, more comfortable, convenient and refined travel experience,” said Liao Mengjun, Vice President of R&D Operations at Li Auto. “Our partnership with Covestro will expedite our exploration in advanced materials, supporting the ongoing enhancement of user product demands.”

During the event, the two parties also unveiled two jointly-developed, industry-leading materials: innovative light-diffusing and infrared-transparent Makrolon® polycarbonates. The light-diffusing polycarbonate allows for a more refined and evenly-distributed illumination effect for smart headlights. Meanwhile, the new infrared-transparent polycarbonate achieves a high transmittance of over 85 percent in the near-infrared spectrum. Compared to conventional black polycarbonate, which absorbs solar energy across the entire spectrum, this new material significantly enhances the light aging resistance of components, contributing to greater durability for the smart headlights of Li Auto.

The first prize went to Isabel Payne, a Product Design Engineering student from the Glasgow School of Art. She created ‘SafiCase’ – a device for cleaning and steam sterilising re-usable menstrual cups using minimal water. The case is entirely self-powered, using a solar battery for the sterilising circuit. It is targeted at women who want something to use when they are nowhere near an electricity source or any running water. It is collapsible, so can be carried easily.

Chairman of judges, Richard Brown, said: “This is a great solution to safely clean a menstrual cup without power and to maintain hygiene. This product uniquely addresses the off-grid challenge and meets a very clear social need, not just for the traveller, but also, for example, displaced people. It was very well researched and is a worthy winner with a product idea that could be commercialised.”

Isabel said: “It means such a lot to have a platform for dealing with the issue of period poverty, which is rarely spoken about, despite affecting so many people worldwide and around 40 per cent of women in the UK. I hope this design helps bring awareness for reusable options and helps other people decide to invest time in designing more solutions, as there is very little innovation in this area.”

The judges awarded second place to Jake Lee (Product Design Engineering), also of Glasgow School of Art, for his product ‘SkinTemp’, a cold-water temperature sensor that alerts users to dangerous drops in body temperature. In third place was Glasgow School of Art’s Jem Mitchell, also a Product Design Engineering student, who produced ‘Sentree’, a solar powered sonic deterrent that protects trees from being overgrazed by animals such as deer.

Notes to editors
Established in 1985, Design Innovation in Plastics is the longest running student plastics design award in Europe. For more information visit www.designinnovationplastics.org.

The Institute of Materials, Minerals and Mining (IOM3) is a major UK engineering institution and is the professional body for the advancement of materials, minerals and mining to governments, industry, academia, the public and the professions. For more information visit www.iom3.org.

The Worshipful Company of Horners is one of the oldest livery companies in the City of London, formed to regulate the horn-working trade. In 1943 it adopted its modern equivalent, the plastics industry. For more information visit www.horners.org.uk.

The Breakthrough Energy Catalyst foundation set up by Bill Gates and the European Investment Bank (EIB) are supporting this installation of the Rondo RHB100 heat battery, which is scheduled to begin operation at Covestro’s Brunsbüttel site at the end of 2026. The project will then produce ten percent of the steam required at the site, saving up to 13,000 tons of CO₂ emissions per year.

Rondo Heat Batteries combine century-old materials and cutting-edge automation to capture electricity and deliver high-temperature heat and power. Electrical energy is stored as heat, using bricks that have been used for heat storage at steel mills for centuries. The heat powers an ordinary boiler to deliver zero-emission steam. Renewable electricity can be intermittently stored when there is an excess available and a constant amount of steam can still be generated continuously.

"As an innovation company, we are always excited when we can further develop and test promising ideas that can bring us closer to our goals of a circular economy and climate-neutral production," says Dr. Thorsten Dreier, CTO of Covestro. “The heat battery is such an idea: a new technology that allows us to go one step further on our way to a sustainable future.”

“Rondo Heat Batteries deliver deep decarbonization by changing the fuel, not the factory,” said Eric Trusiewicz, CEO of Rondo Energy. “We’re honored to be working with Covestro to prove our safety, reliability, and efficiency under real conditions on a large scale over a long period of time. And we’re excited to be deploying in Brunsbüttel, where large flexible electricity loads are particularly valuable to the electricity grid.”

For Covestro, steam generation is an important part of the production process and accounts for a large proportion of energy consumption. The learnings from this first heat battery installation will provide experience and insights for Covestro to be able to assess whether larger-scale deployments are possible.

In addition to the reduced complexity of the new production process, the connection to the existing infrastructure in Antwerp with four production lines for polycarbonate also has an advantageous effect, as it combines global scale in production with the flexibility of a stand-alone unit.

"The new production process is the first and only one of its kind in the world and enables us to offer a broad portfolio of material innovations," says Sucheta Govil, Chief Commercial Officer at Covestro. "With the new plant, we can now produce and launch new polymer materials on an industrial scale much faster than before. This is the result of several years of development work by our research and process technology teams, as well as our long-term experience with polycarbonates. In our Solutions & Specialties segment, we focus on sophisticated products with a high pace of innovation, which is a key success factor since customer requirements change quickly. The new production line is a prime example of how we implement this strategy and support our customers to the best extent."

"Compared to pure polycarbonates, the copolymers open up new possibilites for us to integrate further functionalities and properties into our materials," explains Lily Wang, Global Head of the Engineering Plastics business unit. "These can range from improved mechanical properties, a higher resistance against chemical attack to an enhanced flame retardancy. By that, we can offer innovative materials that meet the high requirements of our customers in a wider range of applications. We will focus first on materials for the electrical, electronics and healthcare industries, while future innovations might focus on mobility and other trends." To understand its customers' needs, Covestro will showcase some of the products that could be produced with the new plant at the Chinaplas exhibition in Shanghai in April and looks forward to talking to customers about these innovative material solutions.

"The new contract shows: We are making consistent progress on our path to climate-neutral production - even in economically challenging times," says Dr. Thorsten Dreier, Chief Technology Officer at Covestro. "Because we are convinced that our vision of a complete focus on the circular economy and climate neutrality is the only way to ensure the long-term success of our company."

Ulf Kerstin, CCO of RWE Supply Trading, says: "We are delighted to support Covestro in achieving its ambitious sustainability goals and to be able to accelerate the transition to climate-neutral production. The great interest of our customers in green power underlines the importance of CO₂-free power for the manufacturing industry."

The new PPA with RWE replaces a current agreement, which expires at the end of 2025. At the Antwerp site, Covestro produces the high-performance plastic polycarbonate, which is used in car headlights, electrical and electronic components, LED lights, medical technology and many other applications. Polyether and the important industrial chemical aniline are also produced there, and Covestro is currently expanding production there with the construction of a new world-scale plant.

"This supply agreement is a further step towards increasing the proportion of renewable power in our production," says Dr. Georg Wagner, Managing Director of Covestro in Antwerp. "With this and the use of sustainable raw materials and innovative recycling technologies, our production site is on the way to a climate-neutral and fully circular future. We are delighted to have found a partner in RWE with whom we can reach the next level."

Covestro aims to achieve climate-neutral production by 2035 and has already concluded several electricity supply contracts worldwide. Since 2023, the site in Shanghai has been supplied with 45% of its electricity from solar and wind power, and in the USA, Covestro has concluded a virtual power purchase agreement with the company Ørsted for 200 gigawatt hours of solar power, which corresponds to twelve percent of the electricity requirements at the Baytown site.

By 2025, ten percent of the electricity at the company's sites in Germany is also to come from renewable energy sources. In this way, Covestro aims to achieve the interim target of reducing greenhouse gases from production by 60% by 2030. At the end of 2023, Covestro covered about 16% of its global electricity needs from renewable sources.

“Securing the title of Top Employer China for six years in a row stands as a remarkable affirmation, underscoring our steadfast commitment to advancing employee well-being, encouraging diversity, equity and inclusion (DEI), and fostering an enriched workplace,” said Covestro China President Holly Lei. “At Covestro, we recognize that our employees are the linchpin of our enduring success in this challenging time. We have been consistently empowering our people through a diverse range of programs and initiatives, while bolstering the agility and resilience of our organization to ensure long-term, sustainable growth.”

In the realm of well-being, Covestro China prioritizes the physical and mental health of its staff. Approximately 30 employee independent well-being clubs, falling under sports and entertainment categories, operate with enthusiastic involvement from company management as role models. Since 2022, Covestro has implemented the Harvard Happiness Course, designed to enhance employee happiness through targeted attention and exercises across five dimensions: spirit, body, mindset, relationship, and emotion. The establishment of the “Happiness Club” in 2023 has seen increased participation, indicating a growing interest in the pursuit of happiness through learning and experience. These initiatives also play a pivotal role in strengthening the DEI landscape within Covestro.

Elsewhere, Covestro has also been consistently enhancing its commitment to people development. The company has integrated and refined the overarching framework, concepts, and tools, with the launch of a dedicated “People Development Experience Room.” This innovative space serves as a central hub for enlightening employees about Covestro’s people development concepts and tools. It offers a holistic view, prompting self-reflection among employees and managers regarding their personal and team development, and igniting enthusiasm across the workforce to embrace and apply the development tools.

“At Covestro, we align employee aspirations with the company’s objectives for joint success, prioritizing people in the continuous strengthening of our people development framework and concept. We care deeply about employee well-being and strive to improve their happiness and engagement. Through a variety of initiatives, including the implementation of digital tools and programs, we actively elevate the employee experience and facilitate effective organizational decision-making,” said Lesley Lin, Head of Human Resources, Greater China, Covestro.

The Top Employers Institute program certifies organizations based on the participation and results of their HR Best Practices Survey, which covers six HR domains consisting of 20 topics, including people strategy, work environment, talent acquisition, learning, diversity, equity and inclusion, and well-being.

As part of this collaborative effort, the initial phase involves the introduction of the first electric heavy-duty truck to replace the existing diesel truck for transporting polymeric diphenylmethane diisocyanate (pMDI) from the Shanghai site to nearby warehouses. This transition is set to cover part of the annual pMDI shuttle volume at Covestro’s largest production site, resulting in a projected reduction of 43 tons of CO₂ equivalent in well-to-wheel emissions (CO₂ emissions over the entire life cycle of fuels) in 2024 compared to the 2022 baseline – a 22 percent decrease. The future use of green power to charge the trucks will further contribute to the goal of achieving net zero in logistics.

Both companies will consistently evaluate the electric truck’s performance and efficiency, aiming for continuous optimization of the total cost of ownership associated with the vehicle. Based on these evaluations, decisions will be made regarding potential scalability.

"As a pivotal route toward achieving net zero, green logistics is poised to deliver sustainable solutions for mitigating scope 3 emissions. We look forward to working with Covestro to advance the exploration and adoption of sustainable logistics solutions in the chemical industry and contribute to the ultimate goal of net-zero emissions from the logistics side," said Fu Peng, Executive Vice President of COSCO Shipping Logistics & Supply Chain Management.

"The supply chain plays a crucial role in the chemical industry’s journey to achieve climate neutrality, demanding collaboration beyond individual company boundaries. The commercial deployment of this groundbreaking electric truck for chemical shuttling is poised to act as a catalyst, propelling our site and company towards climate neutrality and a circular economy," stated Dr. Yun Chen, General Manager of CISS.

Contributing to scope 3 emissions reduction

Approximately 80 percent of Covestro’s total emissions stem from scope 3 emissions, or indirect emissions resulting from upstream and downstream processes, including supply chains, material transport, and raw material processing.

In the Asia Pacific region, where around 70 percent of Covestro’s products are transported by truck, concerted efforts to reduce emissions within the logistics framework are specifically targeted at trucks. In light of this, the green logistics program was launched last year with the objective of devising more sustainable methods for road transportation via trucks. Collaborators in this endeavor include customers, logistics solution and infrastructure partners, and industry organizations, with the network steadily expanding.

The program is designed to rigorously assess the viability of specific strategies under distinct scenarios. Among the explored solutions is the utilization of subsidized biodiesel in Shanghai for long-haul transport of dangerous goods, as well as the integration of hydrogen fuel cell-powered trucks.

"We are committed to expanding our network of partnerships to actively seek, pilot, and scale up sustainable, low-carbon logistics solutions that meet both environmental and commercial needs. We anticipate continued progress in introducing new solutions aimed at significantly reducing our scope 3 emissions, thereby propelling us towards a climate-neutral future," said Marius Wirtz, Senior Vice President, Supply Chain & Logistics Asia Pacific, Covestro.

Covestro has said that it is aiming to become operationally climate neutral – this includes reducing both direct emissions from its own operations (scope 1) as well as indirect emissions from purchased energy (scope 2) to net zero – by 2035. The company is poised to unveil its reduction targets for scope 3 emissions soon.

Covestro is already making an important contribution to more sustainable vehicles and infrastructure with innovative material solutions. In this context, the company is also working in close partnership with Team Sonnenwagen, a team of around 50 students from RWTH Aachen University and Aachen University of Applied Sciences. It is dedicated to developing racing cars that are powered solely by the sun. Covestro shares the students' enthusiasm because the racing cars, with their high efficiency and use of new technologies and materials, are a powerful symbol of the mobility of the future. That is why Covestro is supporting the team as the main sponsor with material solutions and technical exchange for another two years.

"In order to create a climate-neutral and circular mobility of the future, business, politics and society must pull together. At Covestro, we are contributing to this transformation by offering the automotive industry raw materials based on biomass or recyclates and manufacturing our products as energy-efficiently and with as few emissions as possible," said Dr. Thorsten Dreier, Chief Technology Officer, during the discussion. "At Covestro, we want our production to be climate-neutral by 2035 and are relying on energy from renewable sources and innovative process technologies to achieve this."

Covestro's material developments focus on solutions for the major trends of electromobility, autonomous driving and the need for individualization. These include material solutions for compact, powerful and safe batteries for electric cars and robust charging systems, plastics for connected mobility and the Internet of Things, as well as various products for aesthetic and functional automotive interiors and exteriors.

Covestro has been supporting Team Sonnenwagen in the development of ever more efficient solar racing cars since 2017. The students are working together in a wide range of disciplines to improve the aerodynamics, optimize the chassis and install a particularly efficient photovoltaic system and battery. Participants at the NRW Mobility Day were able to take a look at the Covestro Photon, the predecessor model to the current Adelie racing car, and talk to team members. With the Photon, Team Sonnenwagen became European champion at the European solar race in Zolder, Belgium, in September 2022.

Dormagen as TDI hub in Europe 

The TDI plant in Dormagen has an annual capacity of 300,000 tons. It uses the gas phase technology developed by Covestro, which even before modernization required up to 60 percent less energy and up to 80 percent less solvent than conventional processes. The current investment will significantly increase the efficiency and therefore sustainability of the plant even further. TDI is an important raw material for soft foams, which provide comfort in mattresses and upholstered furniture as well as car seats, for example. The material will continue to play an important role for Covestro and the processing industries in the future. 

"In Dormagen, we maintain the largest production facility for TDI in Europe, which means that the location plays a central role in the reliable supply of our customers in the region. Now we continue to consistently align ourselves with their needs. The investment not only underlines our commitment to the European market, but also enables our customers to further reduce their indirect CO₂ emissions on the way to developing climate-neutral and circular products for the consumer markets," says Dr. Christine Mendoza-Frohn, Head of Performance Materials Sales EMEA and LATAM. "At the same time, this investment also underlines our ambition to play a leading role in climate protection and the circular economy together with our partners along the value chain." 

As a company, Covestro is completely aligning itself with the circular economy. Along the way, the company has set itself the goal of achieving operational climate neutrality by 2035. Increasing the efficiency of existing production processes is an important lever for this. From 2005 to 2020, Covestro was able to reduce its specific energy consumption – i.e. the energy consumption per ton of product manufactured – by about 35 percent. By 2035, the specific primary energy demand of the three NRW sites is to be further reduced by around 25 percent compared to 2020 through targeted energy management. Covestro aims to save around 1,100 GWh of primary energy per year from 2035. This corresponds to the annual consumption of more than 50,000 average German households.* Within the next five years, almost half of this potential is to be realized. 

The modernization of the TDI plant in Dormagen is partly funded by the German Federal Ministry for Economic Affairs and Climate Action as part of the Federal Funding for Energy and Resource Efficiency. 

* The figures refer to the calculations of the Federal Statistical Office on the energy consumption of private households for housing (2010-2020): Homepage - German Federal Statistical Office (destatis.de)

Thanks to its long history in polyurethanes chemistry, Covestro boasts a portfolio of insulation material solutions renowned for exceptional thermal and weather resistance. Initially used in refrigeration, they have great potential to enhance energy efficiency in construction.

“Covestro is devoted to becoming fully circular. At the same time, we help our customers and major industries to achieve climate neutrality through our material innovations.¹ The construction industry, particularly in China, is central to this mission. With our new partnerships we will expedite the adoption of more sustainable construction practices in China and jointly play a vital role in mitigating climate change,” said Dr. Markus Steilemann, CEO of Covestro, during the signing of agreements with named companies at the China International Import Expo (CIIE), an event dedicated to promoting imports and international trade.

One key collaboration involves PDG Group and insulation integration specialist Collodin, working on an innovative polyurethane exterior wall insulation system designed to be thinner and lighter than conventional alternatives. This system, named the ‘carbon-optimized composite wall insulation structural integration system’, combines polyurethane insulation with low thermal conductivity and a lightweight non-combustible layer, further reinforced by composite tie bars, ensuring superior insulation. A comprehensive study will evaluate its energy efficiency, safety, and economic viability before implementation on the developer’s future projects, provided it meets all compliance conditions.

“We look forward to partnering with sustainable material expert Covestro in promoting this innovative solution, which could also set new standards in the industry. We believe this collaboration will facilitate the transformation and upgrade of the construction sector, promoting low-carbon, high-quality development in line with China’s dual carbon goals,” emphasized Li Junlan, Chairman of PDG Group.

Another groundbreaking partnership involves Lujiazui Group and Chinese composite profile maker Deyilong. Together, they are developing a low-carbon, energy-efficient window and door system tailored to meet Shanghai’s requirements on ultra-low energy buildings. This system will leverage Covestro’s Baydur^® Pultrusion, a composite material with exceptional thermal insulation, mechanical strength, and durability. The whole window system thereby can be made thinner for better aesthetics.

“We look forward to working with partners including Covestro, which has a proven track record in the field of efficient insulation in windows and doors. We aim to leverage Lujiazui Group’s property development strengths in Pudong, Shanghai to promote these excellent window and door systems and help elevate the industry’s energy efficiency level,” said Xu Erjin, Chairman of Lujiazui Group.

“We are excited to be connected by the CIIE with Chinese property developers, which provides us with new opportunities that will last long. We intend to promote more sustainable and low-carbon solutions for the construction industry, enhance market penetration of energy-saving building solutions, and make efforts towards China’s infrastructure development and dual carbon goals,” said Holly Lei, President of Covestro China.

For a closer look at Covestro’s solutions for a fully circular future at the CIIE, visit us at booth 3B6-05, at the National Exhibition and Convention Center (Shanghai) from November 5 to 10, 2023.

^{1 Carbon neutrality of Covestro products is the result of an internal assessment of a partial product life cycle from raw material extraction (cradle) to the factory gate (of Covestro), also known as cradle-to-gate assessment. The methodology of our LCA, for which an external audit and certification will soon be available, is based on the ISO 14040 and 14044 standards. The calculation takes into account biogenic carbon sequestration based on preliminary data from the supply chain. No compensation measures were applied.}

The joint lab will mainly focus on the commercialization of low-carbon material solutions in future EV models and the establishment of relevant standards, as well as the development of next-generation smart surface technologies and battery solutions. This initiative builds upon a cooperation agreement signed between the two companies at the CIIE last year.

"We’re delighted to deepen our collaboration with HiPhi," said Dr. Markus Steilemann, CEO of Covestro, during the unveiling ceremony at Covestro’s booth at the CIIE. "We set out to address the key challenges of future mobility with the launch of the joint lab. With our common commitment to pioneering low-carbon smart mobility and by combining our strengths and resources, we believe the lab will accelerate the automotive industry’s transformation towards a smarter and climate-neutral future."

"HiPhi aims to redefine the luxury brand in the new era. We are accelerating the adoption of intelligent and low-carbon technology in smart EVs to provide global users with a safe, efficient and sustainable travel experience, thereby changing the future of mobility and contributing to society," said David Ding, Founder and CEO of HiPhi. “Covestro’s advanced material expertise is key to helping us achieve this vision. The establishment of our joint laboratory stems from Covestro’s recognition of the innovative strength represented by HiPhi and other Chinese companies. We also aspire to empower our global partners and foster mutually beneficial relations through the CIIE.”

On display at Covestro’s booth at the CIIE is the HiPhi Y, the latest luxury SUV that incorporates advanced polycarbonate solutions from Covestro, most notably in the headlamp and LiDAR lenses. As EV becomes increasingly smarter, the headlamp presents new opportunities in digital communication beyond lighting. On the HiPhi Y, the headlamp lenses are turned into a projector to display signs and patterns in front of the vehicle, creating an interactive interface with pedestrians and other vehicles. Covestro’s high optical performance Makrolon^® AL solutions offer the needed dimensional stability, UV resistance and high transparency required for this application. In the LiDAR lenses, the Makrolon^® AX portfolio demonstrates superior performance compared to glass, including excellent infrared transmittance, shaping curved surfaces and impact resistance against stone chips. They can also endure the working environment of LiDAR at temperatures from 110 to 115 degrees Celsius for extended periods.

"As the mobility industry embarks on a journey towards carbon neutrality, the demand for circular, low-carbon footprint materials is growing rapidly and will only accelerate in the near future," said Lily Wang, President of the Engineering Plastics segment at Covestro. "We hope to collaborate with more like-minded companies, like HiPhi, to accelerate the decarbonization trend and pioneer smart technology development at the same time."

HiPhi has been a long-term partner of Covestro since 2018. Covestro’s material solutions have been applied to HiPhi’s flagship models, such as the polycarbonate solutions that enable a "smart" B-pillar equipped with complex functions in the all-electric SUV HiPhi X. HiPhi Z, a smart sports sedan, employs polycarbonate grades for the touchpad switch on its steering wheel – enabling a futuristic interactive design – as well as high performance waterborne polyurethane adhesives for auto interiors.

For a closer look at Covestro’s solutions for a fully circular future at the CIIE, visit us at booth 3B6-05, at the National Exhibition and Convention Center (Shanghai) from November 5 to 10, 2023.

“In the face of global challenges such as climate change, innovative materials like plastics are needed more than ever to drive progress towards a truly sustainable future ,” says Dr. Markus Steilemann, CEO of Covestro. “China, with its ambitious climate targets, is a leader in dynamic markets like electric vehicles and renewable energy. We are eager to contribute our material expertise to aid the nation’s transition, while driving fresh business momentum.”

Under the banner of “Becoming Fully Circular and Climate Neutral,” Covestro’s CIIE booth features dedicated areas, including “Beyond Mobility”, “Green Home”, “Renewable Energy” and “Fully Circular”. Several showcases will highlight the pivotal role of sustainable materials in these sectors. Additionally, a dedicated “Covestro Story” area shall engage visitors, particularly those outside the chemical industry.

Chemical recycling of polyurethane foams

The “Fully Circular” zone will for example demonstrate advancements in recycling technologies and in the use of alternative raw materials. Notably, it will showcase a recycled foam created through Covestro’s proprietary chemical recycling process. This groundbreaking process is capable of transforming end-of-life mattress foam directly into its core building blocks, breathing new life into old foam.

At the center of “Beyond Mobility” stands Chinese EV maker HiPhi’s latest luxury SUV – the HiPhi Y. It extensively incorporates Covestro’s advanced and sustainable material solutions in interior and exterior components. This includes the use of high optical performance polycarbonate in LiDAR lenses, taking advantage of the material’s temperature resistance up to 115 degrees Celsius along with its excellent infrared transmittance, ensuring the reliable and stable operation of the entire system. The strengthened partnership builds upon a cooperation agreement signed between the two sides at last year’s CIIE.

Covestro also aims to foster collaborations for ultra-low energy buildings (ULEB). The company’s materials can support making buildings more energy efficient and causing less emissions – key to the sector, which is one of the major contributors of global emissions. Covestro will for example show polyurethane pultrusion composites for window frames, and highly efficient building insulation solutions at the “Green Home” zone. At this year’s CIIE, the German materials manufacturer will sign agreements with Chinese real estate developers and value chain partners, forming multi-party business collaborations in this vital domain to expedite the adoption of sustainable solutions.

“The CIIE has consistently proven to be a highly rewarding endeavor for Covestro. It offers a unique platform to strengthen partnerships and promote our approach to becoming circular and how we can support downstream industries to do the same,” says Holly Lei, president of Covestro China. “We are committed to delivering versatile solutions and exploring innovative business models in collaboration with value chain partners both within and beyond the CIIE venue, in support of China’s sustainable development.”

The CIIE stands as the world’s first national-level import-themed exhibition, an annual event since 2018. This year, it draws over 3,400 international exhibitors and is expected to host hundreds of thousands of visitors. The CIIE serves as a platform that fosters international procurement, investment promotion, cultural exchange, and open cooperation. China’s ambitious climate goals, including reaching peak carbon emissions by 2030 and attaining carbon neutrality by 2060, carry global significance to meet the Paris’ agreement and remain a consistent focal point in the exhibits and activities at the CIIE.

For a closer look at Covestro’s solutions for a fully circular future at the CIIE, visit us at booth 3B6-05, at the National Exhibition and Convention Center (Shanghai) from November 5 to 10, 2023.

"The launch of our MCR production line marks another significant stride in our journey towards achieving a circular economy and operational climate neutrality by 2035," said Sucheta Govil, Chief Commercial Officer of Covestro. "Plastic waste recycling is pivotal in realizing this vision, and through the expansion of our recycled plastics production capacity, we aim to lead the way in driving sustainability across diverse industries."

Covestro is committed to supplying over 60,000 tons of recycled-content polycarbonates annually in the Asia Pacific region by 2026, in response to robust market demand. Recently, the company also transformed an existing compounding line at its Map Ta Phut site in Thailand for mechanically recycled polycarbonate.

"These investments enable us to meet the rising demand for PCR polycarbonates, enhancing our capacity and efficiency. With new or repurposed capacity now operational, we are better positioned to assist our downstream customers in their journey towards more sustainable products, expediting the transformation of industries towards a circular and climate-neutral future," said Lily Wang, Head of Covestro’s Business Entity Engineering Plastics.

A broad range of PCR portfolio

The demand for such materials is surging on a global scale, driven by regulatory initiatives like the European Union’s proposed Directive on end-of-life vehicles (ELV Directive), which sets strict benchmarks for the utilization of recycled plastics. Furthermore, industries like consumer electronics are poised for increased demand for recycled materials, especially those with a substantial recycled content.

These market dynamics underscore the significance of Covestro’s recent developments in providing PCR polycarbonates. Earlier this year, the company unveiled a polycarbonate boasting 90 percent recycled content. This grade not only attains outstanding whiteness and highly saturated colors but also touts a sustainable feature – a 70 percent reduction in carbon footprint compared to its fossil-based virgin plastic counterpart. Achieving this remarkable accomplishment requires a meticulous selection of high-quality recycled materials and precise optimization of material composition during the compounding process.

Furthermore, Covestro is actively engaged in pioneering the chemical recycling of polycarbonates. Having successfully developed an innovative process within the laboratory, the company is now embarking on the technical implementation of this breakthrough at a pilot scale.

Expansion of polycarbonate production capacity in Asia Pacific

After debottlenecking multiple production lines at the Map Ta Phut site in Thailand, Covestro is nearing the final stages of a program to enhance polycarbonate production capacity and capabilities across the Asia-Pacific region. This program also includes the addition of new production lines at sites in Shanghai and Guangzhou, China, as well as Greater Noida, India, in recent times. The combined additional capacity now exceeds 100,000 metric tons annually. These strategic projects, aimed at optimizing the regional production network, have been supported by using digital tools, which also reduced investment costs.

"In this way, we aim not only to meet the growing demand for polycarbonate in Asia, but also to offer our customers there an improved product quality," says Dr. Nicolas Stoeckel, Head of Operations in the Business Entity Engineering Plastics. "Depending on demand, the upgrades can be used for compounding recycled or conventionally produced polycarbonate." Therefore, both projects are also about improving Covestro´s ability to produce more plastics with higher recycled content.
 

This site of Epurex Films, a wholly owned subsidiary of Covestro, houses research & development, application development and production for the semi-finished products. The company has invested a low double-digit million Euro amount in the expansion of the center of excellence for TPU-Films.

The new capacity is intended to meet the growing global demand for multilayer TPU films. They are used in automotive interiors and construction, among other applications. Breathable, water-impermeable specialty films have also proven their worth in wound care and outdoor clothing.

"With this capacity expansion, we are strengthening our Bomlitz site and our position as a leading supplier of technical specialty films," said Dr. Thorsten Dreier, Covestro's Chief Technology Officer, at the inauguration. "At the same time, we are investing in promising technologies and applications and creating new jobs."

For Aleta Richards, global head of the Specialty Films business entity, the expansion offers opportunities to respond even better to individual customer needs and offer more sustainable products. "For some time now, we have also been developing customer-specific solutions with films made from alternative raw materials, as we are also seeing increasing demand in this area. The development and production of partially biobased products is therefore to become a new focus at the Bomlitz site."

Covestro is fully geared toward the circular economy and aims to become climate-neutral by 2035. In 2022 the Bomlitz site has switched its power supply completely to green electricity. Epurex Films is one of Covestro's three competence centers for specialty films in Germany, along with Leverkusen and Dormagen.

"With our multi-layered campaign, we are pursuing the goal of establishing contacts with many partners to advance the industry on its path to climate neutrality and the circular economy," explains Dr. Christian Haessler, one of the two project managers for K 2022 at Covestro. "This communicative 360° approach was also expressed in the motto of our appearance at K 2022, 'Crafting Connections With You'." The Red Dot label has established itself internationally as one of the most coveted seals of quality for good design.

Rüdiger Maeßen, CEO Europe at Uniplan, is equally positive: "The good co-creative collaboration and the innovative concept were fundamental to the success of this holistic campaign. Together with Covestro, we have driven the circular economy agenda in the industry by creating an authentic exchange on multiple channels. Therefore, we are even more pleased that the sustainable campaign approach not only convinced the global target audience, but also the jury of the Red Dot Award."

Creating connections with digital platform

In order to connect with target groups around the world at an early stage and offer them a holistic, long-term experience as a "home base," Covestro and Uniplan designed a digital event platform called "SPACE." It went live several months before the start of the trade show and provided information about planned activities at the booth and the company's major highlight topics:

• Crafting Circular Economy
• Crafting Electrification
• Crafting Sustainable Living
• Crafting Smart Designs

A stage for current trends

These Topic Clusters also formed the basis for the second pillar – the integrated STAGE booth concept. As the other Covestro project manager Dr. Christopher Stillings explains, "Not only the exhibits and topic clusters, but also the wide-ranging lecture program in the central Talks Arena were tailored to these topics. Inspiring guests from well-known companies and universities – all actors in their respective fields – captivated the audience with keynotes on current trends and technologies and during panel discussions. Not only booth visitors participated, but also viewers around the world who followed the live broadcasts via social media."

Another highlight is the Color Material Finish (CMF) Sample Library, a collection of plastic samples that makes materials visible and tangible. Part of Uniplan´s and Covestro's STAGE concept is that the booth – or parts of it – can be used repeatedly for further exhibitions. Sustainability aspects and the reduction of CO₂ emissions were also at the forefront in the selection of materials for the trade show appearance itself. The success proves both partners right: Thus, the quality of contacts was significantly improved compared to K 2019, and a positive response developed both externally and internally over a longer period of time.

Innovators in the spotlight

While innovative developments are showcased and (hopefully) get the attention they deserve, the researchers behind them are often not visible. In the video series "Meet The Innovators" Covestro gives a voice to some of them and their inventions – see the blog post. They were introduced to a larger audience at K 2022, but prominent guests continue to discuss important innovations and technologies in the "Meet The Innovators" livestream series.

Many inspiring encounters at K 2022 have already led to a large number of new partnerships, technologies and material solutions. They form a valuable basis for developments that Covestro plans to showcase at the next major trade show appearance at K 2025. The company's motto may be different then – but the message remains that partnerships are the key to achieving a climate-neutral and circular economy: "Crafting Connections With You".

A Red Dot Award rarely comes alone

Back in May 2023, Covestro and its partner Accesso Dynamics were honored with an award offered by Red Dot and Koelnmesse. At the furniture supplier trade show interzum 2023, they received the "Best of the Best" interzum Award for their Arfinio^® technology. This technology, first presented at K 2022, enables products with complex but seamless shapes. The development also contributes to sustainability, as the products are partly made from bio-based raw materials, are repairable and can be mechanically recycled at the end of their useful life.

Covestro and Uniplan were also nominated for the Heavent Award in the "Forum, Summit, Congress, Fair Award" category for their communication concept for K 2022. A total of 132 projects from event, experimental and live marketing agencies as well as companies and trade fair and congress organizers were submitted for this year's event competition.

“We provide materials that help to facilitate a more climate-neutral and circular world. The products to be manufactured at our new plant in Shanghai are an excellent illustration of this, as they will assist our customers in meeting the increasing demand for renewable energy solutions,” says Sucheta Govil, Chief Commercial Officer at Covestro. “In doing so, we are supporting the growth of an industry that is vital for preserving our climate. Furthermore, we are promoting sustainability in various industries by supplying materials containing renewable attributes.”

The polyurethane elastomers systems produced in the site can be used for a variety of end products. For offshore windpower, the protection of subsea cables is a core application area. The material is also used in the manufacturing process of photovoltaic panels or in screening medias in the mining industry. In all of the above, it is designed for purpose in close collaboration with customers to withstand even the harshest of conditions thanks to its excellent wear, tear and abrasion resistance.

“We want to support the growth of our customers and partake in the growth of key industries. As we expect the Elastomers market to grow above China’s gross domestic product, we want to enable our customers to capture it. That is what we do with our overall investments into our Elastomer business, and with this investment in our new plant in Shanghai right now,” said Dr. Thomas Braig, Head of the Business Entity Elastomers.

The new plant is the latest addition to the Covestro Integrated Site Shanghai (CISS), Covestro’s single largest production site worldwide. CISS is now home to twelve plants. Since 2001, the company has invested about 3.7 billion Euro into the site as of the end of 2022.

Holly Lei, President of Covestro in China, said, “Our company’s vision of becoming fully circular and our target of being operationally climate neutral by 2035 are perfectly aligned with China’s ambitions to be carbon neutral before 2060. The products we produce in CISS and this addition of polyurethane elastomers systems position us to make meaningful contributions to sustainability efforts in China and in the entire region, for example in the area of renewable energy generation.”

CISS is also among Covestro’s ISCC PLUS (International Sustainability and Carbon Certification) certified sites. This means it is capable of supplying customers with drop-in, mass-balanced materials derived from renewable attributed products, thereby helping customers to reduce their carbon footprint. To make more sustainable products easier to distinguish, Covestro introduced the suffix “CQ”. CQ stands for “Circular Intelligence” and identifies products containing a minimum of 25 percent alternative raw materials.

"For me, the Sonnenwagen is a powerful symbol of future mobility, because it shows us that we need to ask crucial questions about materials science and design on the way there," said Sucheta Govil, Chief Commercial Officer at Covestro, in her welcoming speech. "For me, the Sonnenwagen team are exemplary for creativity and entrepreneurial spirit. The students proved an impressive motivation and know-how to develop and optimize new ideas for solar-powered, light-weight electric vehicles."

Multidisciplinary team

As many as nine disciplines of the Aachen-based team were involved in the design: the chassis, aerodynamics, structure, electrical engineering, driving strategy, production, sponsorship, marketing and logistics departments. "Close and efficient cooperation between these areas is very important, because we want to compete in the Challenger class at the race, where the main focus is on performance and maximum energy efficiency," explains Lina Schwering, 1st Chairwoman of Team Sonnenwagen. "A lot of working time has gone into the Adelie, which we have invested alongside our studies and during our free time, and a lot of commitment and heart and soul."

In total, more than 50 teams from 24 countries are setting out on the more than 3,000-kilometer route from Darwin to Adelaide – right across the Australian outback. There, people and models are exposed to very harsh climatic conditions with high temperatures and strong UV exposure from the sun during the race, but also during the preceding test drives. In addition, the vehicle is subjected to strong mechanical stresses that can affect the efficiency and performance of the battery.

Innovative materials

"The Sonnenwagen team therefore needed a lot of support in selecting the materials," says Andreas Brandt, Head of Group Marketing and project sponsor at Covestro. "The new Sonnenwagen incorporates innovative products with different functionalities from various business segments, which are tested under track conditions."

For example, the aerodynamic outer shell was made from milled SikaBlock® polyurethane foam blocks from Sika, a long-standing partner of Covestro and another sponsor of Team Sonnenwagen. The Leverkusen-based company provided raw materials for this and advised the team on the implementation. The Sikaflex® sealants for the solar cells are also based on components from Covestro. Other examples include a plastic sheet made of polycarbonate for the battery enclosure and thermoplastic cushioning materials for the driver's seat trim.

"Pushing boundaries is what we at Covestro have in common with the young talents of Team Sonnenwagen," says Sucheta Govil, summarizing her message. "We push the boundaries of innovation in materials, driven by our commitment to sustainable mobility of the future. With our products and solutions, we materialize the circular economy."

At the inauguration of the new line, the company also launched its new Desmopan^®UP TPU series. UP stands for “Ultimate Protection”. The series offers high durability, adaptability and aesthetics, protecting automotive surface coatings from harsh environmental conditions. The material can also be used to protect wind blades or screens of smart devices.

“We are convinced that our customers and the TPU market enquire not just materials suppliers, but partners to jointly develop solutions. We at Covestro have the capabilities to be such a partner,” says Dr. Andrea Maier-Richter, Head of TPU at Covestro. “We strive to collaborate with our customers and along the value chain to unlock the potential of Desmopan^®UP and meet the growth ambitions of core industries such as automotive and wind.”

The global PPF market is projected to grow steadily until 2030, with the Asia-Pacific region accounting for the largest share of the overall market. The expected growth in that region in turn is driven in large part by the growth of the chinese market. At the same time, North America and Europe are showing solid growth projections as well.

The high interest in the material stems mostly from increasing attention of vehicle owners to the aesthetic condition of vehicles and particularly their surfaces. TPU is a performance benchmark in PPF for quality, long-term aesthetics and surface integrity. Covestro is one of the biggest international suppliers of TPU resins for PPF production.

"We are really excited to start our new production line and launch the new Desmopan^®UP series to meet the increasing demand for high-performance PPF in the Asia-Pacific region and around the world," says Lisa Ketelsen, Head of TPU in the Asia-Pacific region. "This is a perfect example of how Covestro is committed to providing our customers with innovative, high-performance solutions to meet emerging challenges. In addition to this, we can also further develop our product range together with our customers thanks to our local R&D capabilities."

In PPF, the choice of materials and its formulation play a decisive role. Covestro has put years of research into formulation and advanced manufacturing technologies to build the basis for the Desmopan^®UP-based TPUs for PPF. It provides superior UV durability, excellent hydrolysis and chemical resistance, as well as outstanding optical clarity. This ensures long-lasting performance, weather resistance, and impact resistance. In addition, Desmopan^®UP allows PPF to adapt to the complex designs and surfaces of different vehicles quickly and easily.

"For me, the chemical industry is predestined for the use of AI because we have a lot of complex processes going on that cannot be described by fixed rules," says Walter Grüner, Head of IT & Digitalization at Covestro. "They are not suitable for automation. We rather need learning systems to which we grant a certain degree of decision-making autonomy. In doing so, we focus primarily on the development of systems that work in a complementary manner to humans and support their abilities."

With the introduction of AI in the chemical industry, questions about technical, operational and organizational implementation are also increasingly emerging. This includes, for example, the role of AI in decision-making, but also its implementation along value chains.

Artificial Intelligence – great opportunity for chemical industry

Under the motto "Shaping industrial change with AI", the participants exchanged in a generic way views on the following topics:

• AI system to assist decision making or as an autonomous decision-maker?
• AI awareness, literacy and capabilities
• Production technology vs. supply chain management: independent or joint optimization?
• Needs and requirements for external data generation (monitoring)?

"It is precisely the exchange across company boundaries that helps us a lot in the upcoming transformation because overall challenges become clearer," says Nils Janus, Global Head of Advanced Analytics at Covestro. "This increases efficiency and saves time."

Overall, there was agreement among the participants: Artificial intelligence offers great opportunities for the chemical industry. The new systems help to create a common ecosystem for cross-divisional production planning. It must be decided on a case-by-case basis and each company has to decide individually and independently how much autonomy these systems will be given. With regard to access to the systems, the participants saw a strong democratization of artificial intelligence. Companies could support employees in learning more about data and AI and bring them into contact with experts when it comes to the widespread use of AI solutions in the company. The generation and dissemination of ESG (Environmental, Social and Governance) data are currently the biggest drivers for using external data sources. Here, all participants saw opportunities to intensify the use of external sources.

Digitalization drives sustainability

Digitalization is a key driver to improve sustainability and make the circular economy a reality. Covestro is focusing on more data-oriented corporate governance to drive digital transformation.

Covestro is advancing the use of artificial intelligence (AI) both in its own company and in the chemical industry. To this end, the materials manufacturer is investigating how digital technologies can make processes more efficient and sustainable as part of several pilot projects across different divisions.

The R&D teams of Solar Coating Solutions booked their first successes back in 2005 with the development of a new and innovative anti-reflective coating, which could be used in different applications. Around 2010, however, the solar industry worldwide started to emerge and turned into a business opportunity with a huge market demand and growth potential. This was the trigger for the decision to build a dedicated production plant for solar glass coatings in the Netherlands, more specifically on the Brightlands Chemelot Campus in Geleen.

With the solar photovoltaic industry growing globally, the Solar Coatings Business also spread its wings and installed teams in China and in the US. Thanks to smart decision taking, to the expertise of its business development teams in the regions and to the excellent performance and quality of its solar glass coatings, the Netherlands’ plant today remains the largest independent producer outside China. Additionally, during the past ten years the solar glass coatings product portfolio developed from a ‘one fits all solution’ to a highly diversified offering.

Robert von Beulwitz, Managing Director of the Solar Coating Solution, explains: ʺToday we offer amongst others combined anti-reflective and anti-soiling coatings for modules used in desert environments, high power coatings for large utility scale solar parks and special aesthetic coatings for pitch black appearance of solar panels mounted on residential rooftops – mainly in the Netherlands. Our latest innovation being the development and commercialization of a retrofit coating application for older solar parcs. With the expansion of the industry and of our portfolio, we also saw our employee base rising and I would like to thank each and every one of these colleagues for the relentless efforts they deliver every day!ʺ

"All these different solar coating products were developed in the Netherlands by listening to end market requirements around the world. And all of them are produced by employees in our production facility on the Brightlands Campus in Geleen. I am very proud about this story with which – from the Netherlands – we empower solar energy and harvest more energy from the sunʺ, adds Aukje Doornbos, Managing Director of Covestro in the Netherlands.

"We are very proud of this breakthrough solution as it will enable our customers to achieve their sustainability goals faster. This is especially true for industries such as consumer electronics and audio and networking equipment manufacturers, which have ambitious sustainability goals of their own," said Lily Wang, Global Head of the Engineering Plastics segment at Covestro. "This is another step toward our vision of becoming fully circular, and an important contribution to accelerating the transformation of industries toward a recyclable and carbon-neutral future."

This type of plastic can achieve exceptional whiteness and highly saturated colors, which is typically a challenge for PCR plastics with high recycled content. This is made possible by selecting high-quality recyclates and optimizing the material composition during the compounding process. The PCR grade is manufactured with halogen-free flame retardants that meet performance requirements without increasing environmental impact. It also meets the highest V-0 rating of Underwriters Laboratories' UL 94 flammability standards.

Partnership with Jabra

Covestro's Bayblend^® FR3010 R75 polycarbonate blend is used, for example, in the ear cups of Danish brand Jabra's latest Evolve2 headset series for audio equipment and video conferencing systems. This type is made of 75 percent recycled material and has a 50 percent lower carbon footprint² compared to its conventional fossil-based counterpart, but still meets performance requirements well.

To meet rising demand, Covestro is currently building a dedicated compounding plant for PCR polycarbonates at its integrated site in Shanghai. Once commissioned, which is scheduled for later this year, it will be able to supply more than 25,000 metric tons of high-quality PCR polycarbonates annually.

Climate-neutral¹ solutions through mass balancing

In addition to PCR grades produced through mechanical recycling, Covestro is also making progress with polycarbonates attributed with raw materials produced using a mass balance approach derived from bio waste and residual materials and certified to the internationally recognized ISCC PLUS standard.

The company now regularly supplies Makrolon^® RE polycarbonates with a renewable attributed raw material content of up to 89 percent³. Selected products, including climate-neutral¹ polycarbonates, are supplied with 100 percent renewable electricity under a TÜV-certified system⁴. Already at the end of 2021, Covestro supplied customers in Europe with the world's first climate-neutral¹ polycarbonates. Also the RE series is part of the CQ portfolio of circular solutions at Covestro.

The mass-balanced products demonstrate an identical good quality and performance as fossil-based polycarbonates and offer an out-of-the-box solution for customers with a significantly lower carbon footprint.

^{1 Climate neutral according to a verified life cycle assessment based on ISO standards 14040/14044. Climate neutrality is demonstrated by assessing a partial product life cycle from resource extraction (cradle) to factory gate, also known as cradle-to-gate assessment. The calculation takes into account biogenic carbon sequestration rather than first "life" pollution. It is based on preliminary data from the supply chain and replaces the electricity grid mix with renewable electricity used in the Covestro manufacturing process. No compensation measures were applied. The LCA methodology developed by Covestro AG is scientifically sound and corresponds to the state of the art. ID no. 0000083440: Covestro AG - Certipedia} 

^{2 According to an internal calculation by Covestro based on the TÜV reviewed EcoPAss LCA method (ID No. 0000083440: Covestro AG – Certipedia)}

^{3 According to the newly published ISCC PLUS system document V3.4, oxygen atoms from ambient air that react with ISCC-certified raw materials are counted towards the sustainable fraction. ISCC PLUS (www.iscc-system.org)}

^{4 Certified management system: ID no. 0000084999: Covestro AG – Certipedia}

"With this we have fully achieved the goal of developing a technology to chemically recycle these products and convert polyurethane into a high-quality recycled material," says Bart Haelterman, R&D Director at Recticel. "For the first time in history polyurethane is truly fitting into a circular economy." The European Union funded the PUReSmart project with six million euros over a four-year period under its Horizon 2020 research and innovation program (agreement No. 814543).

Building on the PUReSmart project, Covestro is working with partners from the waste management industry to drive the further development of flexible foam recycling through to industrial use. "Our goal is to turn waste into valuable raw materials and to anchor the principle of the circular economy in our company and along the value chain with our partners to achieve this," says Christine Mendoza-Frohn, Head of Performance Materials Sales EMEA & LATAM of Covestro. ʺThat’s why we make innovative recycling a priority. We call this ongoing Evolution of Recycling: Evocycle^® CQ. The first initiative of this kind is dedicated to the chemolysis of PU mattress foam and is called 'Evocycle^® CQ Mattress'. This underlines our willingness to further invest in this technology," says Mendoza-Frohn.

Raw materials in high yield and purity

Unlike other chemical processes for recycling PU flexible foam, the process does not use fossil-based polyol. It requires only the pre-sorted foam from mattress waste, a glycol and an additive. During chemolysis, the polyol and toluene diamine (TDA), the precursor to TDI, are recovered in high purity and yield. After reprocessing, they can be used again as often as required for the production of new PU flexible foams. This ensures a sustainable circular economy for PU flexible foam with a reduced CO₂ footprint.

The goal: an industrial value cycle

Covestro's first initiative, Evocycle^® CQ Mattress, transforms end-of-life mattress foam directly back into its main building blocks, giving old foam a new life within an optimized circular system. The company aims to close the loop in the PU mattress industry by converting waste into valuable resources, reducing the use of fossil fuels and significantly lowering CO₂ emissions. However, there are still many steps to be taken before this vision becomes reality, especially with regard to upscaling the process.

The journey began for Covestro in 2019, leading to the start of a pilot plant at its Leverkusen site as early as 2021 to verify the positive laboratory results achieved to date. If the trials continue to be successful, the company plans to build a larger recycling plant to validate the technology in an industrial simulation environment.

However, an effective and cost-efficient supply of used PU mattresses is also crucial to building a circular economy. To achieve this, large quantities must be collected, broken down into individual components such as springs, textiles and foam parts, and the foam components pre-sorted according to purity and density. This can only succeed in close cooperation with partners – in this case in the recycling industry. Covestro is already cooperating on this with companies such as Interzero and Ecomaison (formerly Eco-mobilier).

"With this investment, we are strengthening our Solutions & Specialties segment and are committed to further expanding our growth businesses," says Sucheta Govil, Chief Commercial Officer of Covestro. "At the same time, we are responding to an increasing demand and supporting the expansion of future technologies and industries."

"We want to drive growth in the polycarbonate films business with innovation and a strong customer focus," says Aleta Richards, Global Head of the Specialty Films segment. “In doing so, we aim to intensify our collaboration with customers in the Asia-Pacific region and expand our product portfolio for the circular economy.”

Expanded range of films made from alternative raw materials

Covestro already offers a whole range of more sustainable PC films, for example mass-balanced grades certified to the internationally recognized ISCC PLUS standard. Raw materials for these films are produced using biowaste and residual materials, which are taken into account in the value chain and in production and attributed to the products.

Since 2022, the Map Ta Phut site has also been ISCC PLUS certified, enabling it to manufacture and supply mass-balanced products. Customers can use these products in their established processes and apply them to meet their sustainability goals. In addition, Covestro already offers a range of films made partly with plant-based raw materials or recycled plastics.

"In our studio, we offer solutions for current challenges, but also want to inspire our customers with visions for ambitious future goals. True to our motto 'Status Next,' we are our customers' partner in driving the circular economy in the coatings and adhesives industry to make our lives more sustainable," says Dickon Purvis, Head of Marketing in the Coatings and Adhesives segment at Covestro. "Only in close exchange with external stakeholders can we identify trends early on and offer products and technologies tailored to future requirements."

In focus: circular economy, productivity and regulations

For the coatings and adhesives sector, as well as downstream industries, the transformation to a circular economy is key to combating climate change and conserving resources. As a leading raw material manufacturer, Covestro is aware of the great responsibility it bears for optimizing these products so that they make an important contribution to the transformation as fundamental building blocks for coatings and adhesives formulations.

At the same time, it is important to maintain or even increase productivity at a high level to ensure growth and profitability in these industries. And last but not least, Covestro wants to support customers in complying with stricter regulations and standards, with the aim of improving occupational safety and industrial hygiene. For all these goals, the company has set up the Status Next Studio platform to ensure lasting and strong customer relationships in an increasingly digitalized world.

The spectrum of applications and industries for Covestro solutions is wide, ranging from future mobility, smart living and infrastructure development to sports and leisure, health and beauty, architecture and construction, printing and packaging. The Status Next Content Warehouse offers highlight topics and best practice examples on the aforementioned focus areas and industries.

Webinars on key trends

Covestro invites customers, partners and anyone interested to dive into the key trends impacting the world of coatings and adhesives. To this end, the company is offering three webinars in English on the following key topics:

Circular Economy 
Tuesday, March 21, 2023, from 14:00 CET. 
Register at https://solutions.covestro.com/en/webinars/2023-03-21-circular-economy/?utm_medium=offline&utm_source=press_release&utm_campaign=ca_2023_status_next&utm_asset=26225&utm_content=status_next_q1_corp_press_release_ce_webinar_registration_page

Regulations 
Wednesday, March 22, 2023, from 14:00 CET 
Register at https://solutions.covestro.com/en/webinars/2023-03-22-regulations/?utm_medium=offline&utm_source=press_release&utm_campaign=ca_2023_status_next&utm_asset=26225&utm_content=status_next_q1_corp_press_release_regulations_webinar_registration_page

Productivity 
Thursday, March 23, 2023, from 14:00 CET 
Register at https://solutions.covestro.com/en/webinars/2023-03-23-productivity/?utm_medium=offline&utm_source=press_release&utm_campaign=ca_2023_status_next&utm_asset=26225&utm_content=status_next_q1_corp_press_release_productivity_webinar_registration_page

In its Status Next Collaboration Suite, Covestro invites participants to further webinars on overarching and strategic coatings and adhesives topics for various industries, where participants can directly exchange ideas with experts from the company.

Covestro started working in the field of continuous fiber-reinforced thermoplastic composites in 2015 with the acquisition of TCG Thermoplast Composite GmbH. Following the strategic decision to discontinue the Maezio^® product line after almost eight years, Covestro searched intensively for a buyer for the Markt Bibart site. As this attempt was ultimately not successful, Covestro decided to close the site later this year. Most recently, 48 of the approximately 7,600 employees in Germany were employed there. “We have initiated an extensive sales process, which, unfortunately, was not successful. Our focus on the ground is now on providing the best possible support to all colleagues. To this end, we will be working closely with the local employee representatives to find fair solutions for all those affected and to ensure that the closure process is socially responsible,” emphasizes Site Manager John Bauer.

A focus on core business

Thermoplastic fiber composites are a highly specialized and competitive niche business. Covestro has invested in building up the business since taking over the site in 2015 and has made very good technical progress in production. Nevertheless, the company has not succeed to scale business with sufficient success in the market. There are only a few synergies with the core business of the Engineering Plastics business entity and the vast majority of key account business. In addition, the typical customers for thermoplastic composites only order on the basis of joint, complex and time-consuming technical application development, and then only in very small quantities. This is in marked contrast to the far predominant distribution model and key account business in the Covestro Group.

Covestro is thus sharpening its focus on its core Engineering Plastics business by discontinuing the Maezio^® products. Major customers in the automotive, electronics and healthcare divisions, among others, use these high-quality polycarbonates for further processing in a wide range of products.

"The joint project with Covestro is an important building block in making our entire value chain climate-neutral. By sourcing raw materials for these products with a significantly reduced carbon footprint, we will be able to reduce our reported indirect emissions by up to 120,000 metric tons of CO₂ equivalents per year," says Dr. Hubert Fink, member of the LANXESS Board of Management. With its Net Zero Value Chain Initiative, the specialty chemicals group plans to eliminate Scope 3 emissions within its upstream and downstream supply chain by 2050. This includes indirect emissions, particularly from purchased raw materials, but also in logistics or disposal. For Scope 1 and 2 emissions, the company aims to be climate neutral as early as 2040. "With this program, we are taking the next step towards a climate-neutral product portfolio and also supporting our customers, who are increasingly looking for sustainable solutions," says Fink. 

Chlorine, caustic soda and hydrogen are basic building blocks for many products in the chemical industry. However, their production is very energy-intensive. LANXESS uses the raw materials supplied by Covestro, for example, for products that are then used in the food and agricultural industries. Covestro produces the three basic raw materials at its North Rhine-Westphalian sites in Leverkusen, Krefeld-Uerdingen and Dormagen. Both the former have already been certified to the internationally recognized ISCC PLUS standard for the production of the strategic raw material chlorine, while this is also planned for Dormagen in the near future. The correct allocation of the electricity to the products is ensured via this certification and the use of the renewable energy is proven by the invalidation of certificates of origin at the Federal Environment Agency. 

Covestro is also actively involved in various projects to build a hydrogen economy that uses mainly or exclusively green hydrogen as an energy carrier. Among other things, the company is supporting, in cooperation with Hydrogenious LOHC Technologies, to build the world's largest plant for storing renewable hydrogen in liquid organic carriers in Dormagen, Germany. 

With regard to its energy supply, Covestro focuses on power purchase agreements (PPAs) for renewable energy or high-level certificates. Only recently, the company signed PPAs with Chinese supplier CGN New Energy on wind and solar power that will cover around 30 percent of the electricity needs of its important production site in Shanghai. Under another, utility Ørsted will supply offshore wind energy starting in 2025, which is expected to meet 10 percent of the electricity needs of Covestro's sites in Germany. ENGIE, Belgium's largest renewable energy producer, will provide onshore wind energy to meet 45 percent of the electricity demand of Covestro's Antwerp production site in Belgium. 

Currently, two of its own ships and two additional chartered ships belong to Tailwind Shipping Lines. In addition to the non-food products from and for Lidl, Tailwind offers space on these ships also for interested companies. Covestro uses this now to also become more independent from the busy main routes and shipping companies and to increase the speed and punctuality of its own deliveries.

"Ocean shipments have been severely disrupted since the pandemic began, and the scheduling accuracy of large shipowners has fallen from 70 to 20 percent," says Sucheta Govil, Chief Commercial Officer at Covestro. "To increase our reliability and punctuality, we are therefore actively looking for alternatives. With Tailwind, we have found a partner to navigate the direct route from Asia to Europe with its ships - and who is therefore exactly where it helps us."

Smaller vessels, more flexibility and punctuality

The Tailwind ships have a capacity of around 5,000 "Twenty Foot Equivalent Units", or TEU, per month. TEU is a standard measure for shipping containers. Large ships from the big shipping companies can hold three to five times more. However, those mega ships can also only discharge at large ports and travel rather fixed routes with pre-determined stops, which increases the susceptibility to delays.

"We now determine the route ourselves. And because our ships are smaller, we can also have them sail to and discharge at smaller ports. This gives us a great advantage in terms of flexibility, speed and thus also punctuality," says Wolf Tiedemann, CEO of Sales, Logistics and Central Divisions of Lidl Stiftung & Co. KG. "This allows us to import our own goods reliably from Asia - but at the same time we still have room that we can offer. We are pleased to have found a first interested customer and partner with Covestro and hope to be able to expand the cooperation further and find other interested parties."

A first container of Covestro materials successfully completed the route from the company's largest production site near Shanghai to Europe. Currently Covestro ships a good 8,000 containers a year on that route alone. How many of these will be transported by Tailwind in the future is currently being negotiated.