20
February
2017
|
12:31
Europe/Amsterdam

Covestro achieves record year

All targets reached or exceeded:

Summary

• Core volumes up 7.5% year-on-year
• Adjusted EBITDA rose by 22.7% to EUR 2.0 billion
• Strong increase in Free Operating Cash Flow
• Net income more than doubled
• Proposed dividend of EUR 1.35 per share
• Confident outlook for 2017

2016 was a record year for materials manufacturer Covestro. Driven by demand for innovative materials, the Group's core volumes increased by 7.5%. With greater capacity utilization across its plants, adjusted EBITDA surged by 22.7% above the 2015 figure to EUR 2.0 billion. Net income more than doubled from EUR 343 million to EUR 795 million. On this basis, Covestro plans to pay its shareholders a dividend of EUR 1.35 per share.

"Our strategy is paying off. These excellent results underscore Covestro's fundamental strength," explains CEO Patrick Thomas. "Growing customer demand for our innovative and sustainable products shows that we are increasingly successful at replacing conventional materials with superior plastics."

Free Operating Cash Flow also increased sharply by 41.8% to EUR 1.4 billion. Covestro increased profitability as well: Return on Capital Employed (ROCE) reached 14.2%, exceeding the previous year significantly. In contrast, Covestro Group's sales were down slightly by 1.5% to EUR 11.9 billion, as a result of lower selling prices and FX effects. ? Optimized production capacity matches growing demand.

In 2016, core volume growth outpaced global gross domestic product (GDP) significantly, thereby emphasizing Covestro's strong strategic positioning alongside important trends in key customer industries. The company was able to consistently increase sales volumes and further improve utilization of existing production capacity. Covestro also began the expansion of its capacity in high-growth regions at an early stage in order to meet increasing demand. This is particularly true of the Asian market, where the company put a plant into operation producing raw materials for coatings (HDI) and doubling its polycarbonates capacity.

In Europe, the production platform is being further optimized. The expansion of production capacity for the rigid foam precursor MDI at the Brunsbüttel (Germany) site was initiated in June. Capacity will double to 400,000 metric tons per year by 2018. In addition, Covestro proved in 2016 that CO2 can be used as a raw material for market-ready products: at Dormagen (Germany) last year, the company put into operation the world's first industrial production facility to use CO2 as a raw material for flexible foam components.

Improved financial flexibility

Covestro repaid all outstanding loans from Bayer in the past fiscal year. In March, the company placed a first bond in the total amount of EUR 1.5 billion as part of a debt issuance program, facilitating the funds to repay the loans in full. By the end of 2016, net financial debt was EUR 1.5 billion, some EUR 700 million below the level of the previous year.

"The debt issuance program provides us with additional financial flexibility," says CFO Frank H. Lutz. "Along with our positive cash flow performance, we now have sufficient funds for financing investments on our own."

Strong demand for Polyurethanes and Polycarbonates

In 2016, Covestro's Polyurethanes segment achieved year-on-year core volume growth of 7.7%, driven by a strong increase in all product groups, particularly in the MDI product group, as well as a 41.2% rise in adjusted EBITDA to EUR 881 million. Demand was driven by key industries such as the automotive and construction sectors. In October, due to an unforeseen production outage at a supplier, Covestro was forced to operate the European production facilities for MDI and TDI at reduced capacity and therefore declared force majeure. This was lifted at the end of the year.

Core volume growth in Polycarbonates was 10.3% year-on-year. Once more, sales volumes increased sharply, particularly in the APAC and NAFTA regions. Adjusted EBITDA climbed 25.7% to EUR 704 million in the Polycarbonate segment. Demand from the electrical and electronics industry was among the main growth drivers.

In the Coatings, Adhesives, Specialties (CAS) segment, core volumes remained stable despite the expected contractual termination of trading activities. Adjusted EBITDA increased by 1.8% to EUR 500 million. Lower raw material prices had a positive effect on earnings. In addition, the trend towards higher-quality end products also pushed demand for CAS products.

High profitability in Q4 2016

Covestro's successful performance continued in the fourth quarter of 2016. From October to December, core volumes were up 4.8% compared to the same period in the previous year. Thanks to higher selling prices, Group sales rose by 7.8% to EUR 3.0 billion. Adjusted EBITDA jumped 52.3% to EUR 390 million. Net income of EUR 124 million was also well above the fourth quarter of 2015 (minus EUR 84 million). Free Operating Cash Flow rose slightly by 3.6% to EUR 407 million.

Further profitable growth envisaged

In 2017, Covestro will continue to work on developing innovative materials in line with the company's vision: 'To make the world a brighter place'. "With our clear focus on sustainable growth in line with global macro trends, we have established a strong position for profiting from long-term market developments. We therefore face 2017 with great confidence," states Patrick Thomas.

As a global company with operations in close proximity to its regional customers, Covestro also considers itself well positioned in an environment marked by geopolitical uncertainty and economic volatility. Based on current global economic and key customer industry forecasts, Covestro expects solid performance across key indicators in 2017. The company anticipates a low-to-mid single-digit percentage increase in core volume growth at Group level. Covestro projects Free Operating Cash Flow to be slightly above the average of the last three years and ROCE to be slightly above the 2016 level.

Boilerplate

About Covestro:

With 2016 sales of EUR 11.9 billion, Covestro is among the world's largest polymer producers. Business activities are focused on the manufacture of high-tech polymer materials and the development of innovative solutions for products used in many areas of daily life. The main segments served are the automotive, electrical and electronics, construction and the sports and leisure industries. Covestro has 30 production sites around the globe and as of December 31, 2016, employed approximately 15,600 people.
 

Forward-looking statements

This investor news may contain forward-looking statements based on current assumptions and forecasts made by Covestro AG. Various known and unknown risks, uncertainties and other factors could lead to material differences between the actual future results, financial situation, development or performance of the company and the estimates given here. These factors include those discussed in Covestro's public reports which are available on the Covestro website at www.covestro.com. Covestro assumes no liability whatsoever to update these forward-looking statements or to conform them to future events or developments.